71918-114LF FCI, 71918-114LF Datasheet - Page 11

• Manufacturer Part Number: 71918-114LF
• Description: CONN HEADER 14POS DUAL VERT PCB
• Manufacturer: FCI
• Series: Quickie™, Basics+r
• Type: PCB Plugr

Specifications of 71918-114LF

• Contact Type: Male Pin
• Connector Type: Header, Shrouded
• Number Of Positions: 14
• Number Of Positions Loaded: All
• Pitch: 0.100" (2.54mm)
• Number Of Rows: 2
• Row Spacing: 0.100" (2.54mm)
• Contact Mating Length: 0.228" (5.80mm)
• Mounting Type: Through Hole
• Termination: Solder
• Fastening Type: Latch Lock/Eject Hooks
• Contact Finish: Gold, GXT™
• Contact Finish Thickness: 30µin (0.76µm)
• Color: Gray
• Agency Approvals: CSA, UL
• Angle: Straight
• Brand/series: Quickie®
• Contact Plating: Gold/GXT™
• Current, Rating: 3 A
• Flammability Rating: UL94V-0
• Length, Overall: 54.86 mm
• Length, Pin: 0.114 "
• Material, Contact: Phosphor Bronze
• Material, Housing: Thermoplastic
• Mounting Hole Size: 1.02, 2.8 "
• Number Of Contacts: 14
• Pin Spacing: 2.54 mm
• Special Features: Eject Latch
• Temperature, Operating: -65 to +125 °C
• Voltage, Rating: 1500 VAC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: 609-3525; 71918-114LF

TITLE
Quickie™ Connector System
Copyright
Form E-3334
Rev E
3.7
FCI
3.6.4
3.6.5
3.6.6
Environmental Conditions
3.7.1
Durability. After 100 mating cycles of the header and receptacle receptacle, the individual
contact separation force shall be not less than specified above (see paragraph 3.6.4) and the
contact resistance shall not exceed 15 milliohms (see paragraph 3.5.2).
Contact to Housing Retention. The force required to dislodge the receptacle terminal from its
housing cavity shall be 1 Lb. minimum prior to cable termination or assembly of strain reliefs.
Individual Contact Separation Force. When measured using a gage configured as shown
in Figure 4, the individual contact separation force shall be not less than 25 grams.
Humidity. Within 1 hour after exposure of the mated connector to a high humidity
environment, the insulation resistance of an unterminated connector shall be not less than
20,000 megohms (see paragraph 3.5.4); the contact resistance of a terminated connector
shall not exceed 15 milliohms (see paragraph 3.5.2). The test shall be in accordance with
MIL-STD-202, Method l03; the following details shall apply:
(a) Test Duration - 96 hours
(b) Relative Humidity - 90% minimum
(c) Temperature - 40 o C
TYPE
FIGURE 4 - SEPARATION FORCE GAGE
PRODUCT SPECIFICATION
PDM: Rev:F
STATUS:
NUMBER
PAGE
AUTHORIZED BY
CLASSIFICATION
M.Barrios
11 of 20
Released
BUS-12-082
UNRESTRICTED
Printed: Apr 13, 2007
REVISION
DATE
31 Jul 06
F
GS-01-001
.