H5CX-L8-N AC100-240 Omron, H5CX-L8-N AC100-240 Datasheet - Page 41

• Manufacturer Part Number: H5CX-L8-N AC100-240
• Description: RELAY TIMER DGTL SPDT 100/240VAC
• Manufacturer: Omron
• Series: H5CXr

Specifications of H5CX-L8-N AC100-240

• Relay Type: Integrated
• Function: Programmable (Multi-Function)
• Circuit: SPDT (1 Form C)
• Delay Time: 0.001 Sec ~ 9999 Hrs
• Output Type: Mechanical Relay
• Contact Rating @ Voltage: 5A @ 250VAC
• Voltage - Supply: 100 ~ 240VAC
• Mounting Type: Socket
• Termination Style: 8 Pin Socketable
• Timing Adjustment Method: Up/Down Digit Keys
• Timing Initiate Method: Input Voltage, Trigger Signal
• Time Range: 0.001s-9999hr
• Power Consumption: 6.2VA
• Reset Time: 20ms
• Character Size: 11.5mm
• Time Range Min: 0.001s
• Supply Voltage Min: 100VAC
• Connector Type: 8-Pin Socket
• Signal Input Type: PNP/NPN
• No. Of Digits / Alpha: 4
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: PNP/NPN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: H5CXL8NAC100240; Z2999

■ Input Connections
The inputs of the H5CX-B are no-voltage (short-circuit or open) inputs or voltage inputs.
No-voltage Inputs (NPN Inputs)
No-voltage Input Signal Levels
Note: The DC voltage must be 30 VDC max.
Voltage Inputs (PNP Inputs)
Voltage Input Signal Levels
High level (Input ON):
Low level (Input OFF):
Input resistance:
Note: The DC voltage must be 30 VDC max.
PLC or sensor
Sensor
No-contact input
Contact input
No-contact Input
(NPN Transistor)
(Connection to NPN open
collector output sensor)
Open Collector
Operate with transistor OFF
0 V
Operate with transistor ON
0 V
Short-circuit level
Transistor ON
Residual voltage: 3 V max.
Impedance when ON: 1 kΩ max.
(the leakage current is about 12 mA when the
impedance is 0 Ω)
Open level
Transistor OFF
Impedance when OFF: 100 kΩ min.
Use contact which can adequately switch
5 mA at 10 V
4.5 to 30 VDC
0 to 2 VDC
Approx. 4.7 kΩ
Voltage Output
Sensor
Sensor
No-contact Input
(PNP Transistor)
(Connection to PNP open
collector output sensor)
Operate with transistor ON
Operate with transistor ON
0 V
0 V
Contact Input
Operate with relay ON
0 V
Contact Input
Operate with relay ON
0 V
DC Two-wire Sensor
Leakage current:
Switching capacity: 5 mA min.
Residual voltage:
Operating voltage: 10 VDC
Applicable Two-wire Sensor
Operate with transistor ON
0 V
1.5 mA max.
3.0 VDC max.
H5CX-B
41