DEMO9S08LC60 Freescale Semiconductor, DEMO9S08LC60 Datasheet - Page 9

• Manufacturer Part Number: DEMO9S08LC60
• Description: BOARD DEMO FOR 9S08LC60
• Manufacturer: Freescale Semiconductor
• Type: MCUr

Specifications of DEMO9S08LC60

• Contents: Evaluation Board
• Processor To Be Evaluated: MC9S08LC60
• Interface Type: RS-232, USB
• Silicon Manufacturer: Freescale
• Core Architecture: HCS08
• Core Sub-architecture: HCS08
• Silicon Core Number: MC9S08
• Silicon Family Name: S08LC
• Rohs Compliant: Yes
• For Use With/related Products: MC9S08LC60
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2 Hardware Features
2.1 Demonstration Board Features
The DEMO9S08LC60 board features:
A MC9S08LC60 microcontroller (in 80-pin LQFP package, already programmed with a
demo application);
One clock sources: a 32.768 KHz crystal, selectable via the “CLK ENA” jumpers.
A 12 V DC Power Supply Input Connector;
Power input selection jumpers for selecting the input voltage source:
o
o
A built-in USB-to-BDM circuitry which allows the host PC to communicate with the
microcontroller through a standard USB interface. USB 2.0 is fully supported. When
using an external in-circuit debugger (via the “BDM” connector), the USB-to-BDM
circuitry must be bypassed by removing the BKGD and RESET# jumpers in the “IO2
ENA” jumper strip.
A Reset push-button connected to the MCU Reset pin.
A series of inputs:
o
o
o
o
o
An series of outputs:
o
12 V DC input connector;
USB connector;
Four push-buttons together with jumpers to connect/disconnect them to/from the
microcontroller;
A potentiometer, together with a jumper to connect/disconnect it to/from the PTA0
pin of the microcontroller;
An NTC-based temperature sensor, together with a jumper to connect/disconnect
it to/from the PTA7 pin of the microcontroller;
A photocell, together with a jumper to connect/disconnect it to/from the PTA1 pin
of the microcontroller;
An accelerometer (Freescale MMA7260Q). All of the sensor’s input/output lines
are connected to the microcontroller via jumpers.
Eight high-efficiency (low-current) LEDs together with jumpers to
connect/disconnect them to/from the microcontroller;
DEMO9S08LC60 User's Manual
Page 7