STEVAL-PCC010V1 STMicroelectronics, STEVAL-PCC010V1 Datasheet - Page 19

• Manufacturer Part Number: STEVAL-PCC010V1
• Description: BOARD EVAL FOR ST802RT1
• Manufacturer: STMicroelectronics

Specifications of STEVAL-PCC010V1

• Main Purpose: Interface, Ethernet Controller (PHY and MAC)
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: ST802RT1
• Primary Attributes: 1 Port, 100BASE-TX/10BASE-T
• Secondary Attributes: MII, RMII
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-10360

Configuration and functionality
6.2.2
6.2.3
6.2.4
19/37
There are two buttons on the STM32F107 controller demonstration board. The RESET
button resets the STM32F107 MCU to its initial state. The B1 general purpose button is
connected to PA4-pin of STM32F107 MCU and is active low.
LEDs
There are three LEDs on the STM32F107 controller demonstration board. LD1 and LD2 are
general purpose LEDs connected to PC13 and PC14-pins of the STM32F107 MCU. LD3 is
used for indicating that the board is powered.
There is MCO (Main Clock Output) clock signal of STM32 available on this test point which
can be used as input clock source of the ST802RT1 TX mode PHY.
Buttons
Test point MCO
Doc ID 16379 Rev 2
UM0819