P0006 Terasic Technologies Inc, P0006 Datasheet - Page 24

• Manufacturer Part Number: P0006
• Description: BOARD ADAPTER THDB-SUM
• Manufacturer: Terasic Technologies Inc

Specifications of P0006

• Accessory Type: Adapter Board
• For Use With/related Products: Board with HSMC Connector
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

This chapter illustrates how to connect the THDB-SUM board to a HSMC interface host board using a
Cyclone III Starter Board as an example
This section describes how to use THD-SUM board the Cyclone III start board and what users need to know
during the operation
4.1
To correctly operate the THDB-SUM board with the Cyclone III start board, users need to pay attention to
the following notes:
1.
2.
3.
4.
Connecting THDB-SUM Board to Cyclone III Start Board
Observe the orientation of the HSMC connector when connecting the THDB-SUM to the Cyclone
III Starter Board.
Users
to match the 2.5V IO pins of the Cyclone III board.
Configure JP4 of the THDB-SUM according to the logic level of the Santa Cruz daughter board
(refer to Table 3.2)
Please note that there are two LVDS pairs on the HSMC connector: the HSMC_CLK_p1/n1 (form a
MUST
Figure 4.1 Connecting the THDB-SUM board to the Cyclone III start board
short Pin 1 and Pin 2 of the JP3 on the THDB-SUM to force the voltage level to 2.5V