S82Y-H10F FOR S82H-100W Omron, S82Y-H10F FOR S82H-100W Datasheet - Page 19

• Manufacturer Part Number: S82Y-H10F FOR S82H-100W
• Description: MOUNTNG BRAKT FRONT FOR S82H-100
• Manufacturer: Omron
• Series: S82Hr

Specifications of S82Y-H10F FOR S82H-100W

• Accessory Type: Mounting Bracket(s)
• For Use With/related Products: S82H-x100xx Power Supply
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: S82Y-H10FFORS82H-100W; S82YH10FFORS82H100W

Precautions
J MOUNTING
Note: Be careful not to impose any excessive vibration or impact
•
•
•
Provide at least the spaces listed in the following table.
Model
100W,
150W
300W
600W
To improve and maintain the reliability of the Power Supply
over a long period of time, adequate consideration must be
given to heat dissipation.
Mount the Power Supply so that air flow takes place around
the Power Supply. The Power Supply is designed to dissipate
heat through natural air-flow.
It is recommended that the Power Supply be mounted on a
metal plate.
Metal plate
when installing.
*1
30 mm
(1.18)
30 mm
(1.18)
30 mm
(1.18)
Air
*2
50 mm
(1.97)
50 mm
(1.97)
50 mm
(1.97)
*3
20 mm
(0.78)
20 mm
(0.78)
20 mm
(0.78)
*4
20 mm
(0.78)
50 mm
(1.97)
70 mm
(2.76)
*5
20 mm
(0.78)
40 mm
(1.57)
50 mm
(1.97)
•
•
•
•
•
J WIRING PRECAUTIONS
The Power Supply is provided with reinforced insulation between
the primary and secondary terminals. When using the secondary
circuit as an SELV circuit, the circuit connected to the output
terminals and auxiliary function terminals must be a SELV circuit.
Forced-air cooling is recommended.
Don’t expose the product to the direct sunlight.
Be careful not to allow any machining chips or dust into the
product while fabricating mounting plates.
Don’t use the product where fluids, foreign matter, or corro-
sive gases may enter the product.
Provide at least the spaces listed in the following table.
Switching Power Supply
S82H
19