APTH003A0X4-SRZ Lineage Power, APTH003A0X4-SRZ Datasheet - Page 17

• Manufacturer Part Number: APTH003A0X4-SRZ
• Description: DC-DC 0.6-3.63V @ 3A
• Manufacturer: Lineage Power
• Series: Pico TLynx™r
• Type: Point of Load (POL) Non-Isolated with Remote On/Offr

Specifications of APTH003A0X4-SRZ

• Output: 0.6 ~ 3.63V
• Number Of Outputs: 1
• Power (watts): 10W
• Mounting Type: Surface Mount
• Voltage - Input: 2.4 ~ 5.5V
• Package / Case: 10-SMD Module
• 1st Output: 0.6 ~ 3.63 VDC @ 3A
• Size / Dimension: 0.48" L x 0.48" W x 0.25" H (12.2mm x 12.2mm x 6.3mm)
• Power (watts) - Rated: 10W
• Operating Temperature: -40°C ~ 85°C
• Efficiency: 94%
• Approvals: CSA, EN, UL, VDE
• Product: Non-Isolated / POL
• Output Power: 11 W
• Input Voltage Range: 2.4 V to 5.5 V
• Output Voltage (channel 1): 0.6 V to 3.63 V
• Output Current (channel 1): 3 A
• Output Type: Non-Isolated
• Output Voltage: 0.6 V to 3.63 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• Lead Free Status / Rohs Status: Details

Data Sheet
April 7, 2011
Thermal Considerations
Power modules operate in a variety of thermal
environments; however, sufficient cooling should
always be provided to help ensure reliable operation.
Considerations include ambient temperature, airflow,
module power dissipation, and the need for increased
reliability. A reduction in the operating temperature of
the module will result in an increase in reliability. The
thermal data presented here is based on physical
measurements taken in a wind tunnel. The test set-up
is shown in Figure 45. The preferred airflow direction
for the module is shown in Figure 46.
The thermal reference points, T
specifications are shown in Figure 46. For reliable
operation the temperatures at these points should not
exceed 125
not exceed the rated power of the module (Vo,set x
Io,max).
Please refer to the Application Note “Thermal
Characterization Process For Open-Frame Board-
Mounted Power Modules” for a detailed discussion of
thermal aspects including maximum device
temperatures.
LINEAGE
Wind Tunnel
PWBs
POWER
Figure 45. Thermal Test Setup.
o
C. The output power of the module should
flow
Air
(0.50)
x
12.7_
(3.0)
76.2_
25.4_
(1.0)
2.4 – 5.5Vdc input; 0.6Vdc to 3.63Vdc output; 3A output current
ref
Probe Location
for measuring
airflow and
ambient
temperature
Power Module
used in the
Pico TLynx
TM
Figure 46. Preferred airflow direction and location
of hot-spot of the module (Tref).
3A: Non-isolated DC-DC Power Modules
17