M27C801-100B1 STMicroelectronics, M27C801-100B1 Datasheet - Page 5

• Manufacturer Part Number: M27C801-100B1
• Description: IC OTP 8MBIT 100NS 32DIP
• Manufacturer: STMicroelectronics

Specifications of M27C801-100B1

• Format - Memory: EPROMs
• Memory Type: OTP EPROM
• Memory Size: 8M (1M x 8)
• Speed: 100ns
• Interface: Parallel
• Voltage - Supply: 4.5 V ~ 5.5 V
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 32-DIP (0.600", 15.24mm)
• Organization: 1Mx8
• Interface Type: Parallel
• In System Programmable: External
• Access Time (max): 100ns
• Package Type: PDIP
• Reprogramming Technique: OTP
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (min): 4.5V
• Operating Supply Voltage (max): 5.5V
• Supply Current: 50mA
• Pin Count: 32
• Mounting: Through Hole
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Capacitance, Input: 6 pF
• Capacitance, Output: 12 pF
• Current, Input, Leakage: ±10 μA
• Current, Operating: 35 mA
• Current, Output, Leakage: ±10
• Current, Supply: 35 mA (Max.)
• Density: 8M
• Temperature, Operating: 0 to +70 °C
• Temperature, Operating, Maximum: 70 °C
• Temperature, Operating, Minimum: 0 °C
• Time, Access: 100 ns
• Time, Fall: ≤20 ns
• Time, Rise: ≤20 ns
• Voltage, Input, High: 6 V
• Voltage, Input, High Level: 2 V (Min.)
• Voltage, Input, Low: 0.8 V
• Voltage, Input, Low Level: 0.80 V (Max.)
• Voltage, Output, High: 3.6 V (TTL), 4.3 V (CMOS)
• Voltage, Output, Low: 0.4 V
• Voltage, Supply: 5 V
• Access Time: 45ns
• Low Power Consumption: - Active current 35mA at 5 MHz - Standby current 100 μA
• Programming Voltage: 12.75 V ± 0.25 V
• Memory Configuration: 1M X 8
• Supply Voltage Range: 4.5V To 5V
• Memory Case Style: DIP
• No. Of Pins: 32
• Rohs Compliant: Yes
• Operating Temperature Range: 0°C To +70°C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-1687-5

M27C801
1
Description
The M27C801 is an 8 Mbit EPROM offered in the two ranges UV (ultra violet erase) and
OTP (one time programmable). It is ideally suited for applications where fast turn-around
and pattern experimentation are important requirements and is organized as 1,048,576 by 8
bits.
The FDIP32W (window ceramic frit-seal package) has transparent lid which allows the user
to expose the chip to ultraviolet light to erase the bit pattern. A new pattern can then be
written to the device by following the programming procedure.
For applications where the content is programmed only one time and erasure is not
required, the M27C801 is offered in PDIP32 and PLCC32 packages.
In order to meet environmental requirements, ST offers the M27C801 in ECOPACK®
packages. ECOPACK packages are Lead-free. The category of second-level interconnect is
marked on the package and on the inner box label, in compliance with JEDEC Standard
JESD97. The maximum ratings related to soldering conditions are also marked on the inner
box label.
ECOPACK is an ST trademark. ECOPACK® specifications are available at: www.st.com.
See
signals connected to this device.
Figure 1.
Figure 1: Logic diagram
Logic diagram
A0-A19
GV PP
and
E
Table 1: Signal descriptions
20
V CC
V SS
M27C801
8
Q0-Q7
for a brief overview of the
AI01267
Description
5/24