M27C801-100B1 STMicroelectronics, M27C801-100B1 Datasheet - Page 13

• Manufacturer Part Number: M27C801-100B1
• Description: IC OTP 8MBIT 100NS 32DIP
• Manufacturer: STMicroelectronics

Specifications of M27C801-100B1

• Format - Memory: EPROMs
• Memory Type: OTP EPROM
• Memory Size: 8M (1M x 8)
• Speed: 100ns
• Interface: Parallel
• Voltage - Supply: 4.5 V ~ 5.5 V
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 32-DIP (0.600", 15.24mm)
• Organization: 1Mx8
• Interface Type: Parallel
• In System Programmable: External
• Access Time (max): 100ns
• Package Type: PDIP
• Reprogramming Technique: OTP
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (min): 4.5V
• Operating Supply Voltage (max): 5.5V
• Supply Current: 50mA
• Pin Count: 32
• Mounting: Through Hole
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Capacitance, Input: 6 pF
• Capacitance, Output: 12 pF
• Current, Input, Leakage: ±10 μA
• Current, Operating: 35 mA
• Current, Output, Leakage: ±10
• Current, Supply: 35 mA (Max.)
• Density: 8M
• Temperature, Operating: 0 to +70 °C
• Temperature, Operating, Maximum: 70 °C
• Temperature, Operating, Minimum: 0 °C
• Time, Access: 100 ns
• Time, Fall: ≤20 ns
• Time, Rise: ≤20 ns
• Voltage, Input, High: 6 V
• Voltage, Input, High Level: 2 V (Min.)
• Voltage, Input, Low: 0.8 V
• Voltage, Input, Low Level: 0.80 V (Max.)
• Voltage, Output, High: 3.6 V (TTL), 4.3 V (CMOS)
• Voltage, Output, Low: 0.4 V
• Voltage, Supply: 5 V
• Access Time: 45ns
• Low Power Consumption: - Active current 35mA at 5 MHz - Standby current 100 μA
• Programming Voltage: 12.75 V ± 0.25 V
• Memory Configuration: 1M X 8
• Supply Voltage Range: 4.5V To 5V
• Memory Case Style: DIP
• No. Of Pins: 32
• Rohs Compliant: Yes
• Operating Temperature Range: 0°C To +70°C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-1687-5

M27C801
4
DC and AC characteristics
This section summarizes the operating and measurement conditions, and the DC and AC
characteristics of the device. The parameters in the DC and AC characteristic tables that
follow are derived from tests performed under the measurement conditions summarized in
the relevant tables. Designers should check that the operating conditions in their circuit
match the measurement conditions when relying on the quoted parameters.
Table 5.
Figure 5.
Input rise and fall times
Input pulse voltages
Input and output timing ref. voltages
AC measurement conditions
AC testing input output waveform
Parameter
High Speed
Standard
2.4V
0.4V
3V
0V
High Speed
0 to 3V
1.5V
10ns
1.5V
2.0V
0.8V
AI01822
DC and AC characteristics
20ns (10% to 90%)
0.4 to 2.4V
0.8 and 2V
Standard
13/24