dsPIC33FJ06GS001-I/SO Microchip Technology, dsPIC33FJ06GS001-I/SO Datasheet - Page 38

• Manufacturer Part Number: dsPIC33FJ06GS001-I/SO
• Description: Digital Signal Processors & Controllers - DSP, DSC 40 MIPS 6 KB FL 256Bytes RAM SMPS
• Manufacturer: Microchip Technology

Specifications of dsPIC33FJ06GS001-I/SO

• Rohs: yes
• Core: dsPIC33F
• Data Bus Width: 16 bit
• Program Memory Size: 6 KB
• Data Ram Size: 256 B
• Device Million Instructions Per Second: 40 MIPs
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Package / Case: SOIC-18
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C

dsPIC33F DEVICES WITH VOLATILE CONFIGURATION BITS
6.2.4.3
The READP command instructs the programming
executive to read N 24-bit words of code memory,
starting from the 24-bit address specified by Addr_MSB
and Addr_LS. This command can only be used to read
24-bit data. All data returned in the response to this
command uses the packed data format described in
Section 6.2.2 “Packed Data
Expected Response (2 + 3 * N/2 words for N even):
0x1200
2 + 3 * N/2
Least significant program memory word 1
...
Least significant data word N
Expected Response (4 + 3 * (N
for N odd):
0x1200
4 + 3 * (N
Least significant program memory word 1
...
MSB of program memory word N (zero padded)
DS70659B-page 38
15
Opcode
Length
N
Reserved
Addr_MSB
Addr_LS
Note:
Opcode
Field
Reserved
–
12 11
Reading unimplemented memory will
cause the programming executive to
reset. Please ensure that only memory
locations present on a particular device
are accessed.
1)/2
READP Command
0x2
0x4
Number of 24-bit instructions to read
(maximum of 32768).
0x0
MSB of 24-bit source address.
Least Significant 16 bits of 24-bit
source address.
Addr_LS
8 7
N
Description
Format”.
Length
–
1)/2 words
Addr_MSB
0
6.2.4.4
The PROGP command instructs the programming
executive to program 64 instruction words starting at
the specified memory address.
The data to program the memory, located in command
words D_1 through D_96, must be arranged using the
packed instruction word format illustrated in
After all data has been programmed to code memory,
the programming executive verifies the programmed
data against the data in the command.
Expected Response (2 words):
0x1500
0x0002
15
Opcode
Length
Reserved
Addr_MSB
Addr_LS
D_1
D_2
...
D_96
Note:
Opcode
Field
Reserved
12 11
Refer to
information.
PROGP Command
0x5
0x63
0x0
MSB of 24-bit destination address.
Least Significant 16 bits of 24-bit
destination address.
16-bit data word 1.
16-bit data word 2.
16-bit data word 3 through 95.
16-bit data word 96.
Table 2-2
Addr_LS
© 2011 Microchip Technology Inc.
D_N
D_1
D_2
...
8 7
Description
for code memory size
Length
Addr_MSB
Figure
6-4.
0