QL2007 ETC1 [List of Unclassifed Manufacturers], QL2007 Datasheet - Page 6

• Manufacturer Part Number: QL2007
• Description: 3.3V and 5.0V pASIC 2 FPGA Combining Speed, Density, Low Cost and Flexibility
• Manufacturer: ETC1 [List of Unclassifed Manufacturers]

Pin
TDI
TRSTB
TMS
TCK
TDO
STM
I/ACLK
I/GCLK
I
I/O
VCC
GND
INFORMATION
ORDERING
Active low Reset for JTAG
Test data out for JTAG
High-drive input and/or array
High-drive input and/or global
Input/Output pin
Power supply pin
Ground pin
Function
Test Data In for JTAG
Test Mode Select for JTAG
Test Clock for JTAG
Special Test Mode
network driver
network driver
High-drive input
pASIC 2 device
Speed Grade
X = quick
0 = fast
1 = faster
2 = fastest
pASIC device
part number
QuickLogic
PIN DESCRIPTIONS
3-30
Hold LOW during normal operation. Connect to
Hold HIGH or LOW during normal operation.
Description
Hold HIGH during normal operation. Connect to
VCC if not used for JTAG.
ground if not used for JTAG.
Hold HIGH during normal operation. Connect to
VCC if not used for JTAG.
Connect to VCC or ground if not used for JTAG.
Output that must be left unconnected if not used for JTAG.
Must be grounded during normal operation.
Can be configured as either or both.
Can be configured as either or both.
Use for input signals with high fanout.
Can be configured as an input and/or output.
Connect to 3.3V supply.
Connect to ground.
QL 2007 - 1 PQ208 C
Operating Range
Package Code
C = Commercial
I = Industrial
PL84 = 84-pin PLCC
PF144 = 144-pin TQFP
PQ208 = 208-pin PQFP
QL2007