PPC440GX-3FF667C AMCC (Applied Micro Circuits Corp), PPC440GX-3FF667C Datasheet
![no-image](/images/manufacturer_photos/0/0/43/amcc__applied_micro_circuits_corp__sml.jpg)
PPC440GX-3FF667C
Manufacturer Part Number
PPC440GX-3FF667C
Description
PBGA 552/32 BIT PPC CORE, UP TO 667MHZ, 2X 10/100/1G, 2X 10/100, PCIX, 2X I
Manufacturer
AMCC (Applied Micro Circuits Corp)
Specifications of PPC440GX-3FF667C
Lead_time
182
Pack_quantity
220
Comm_code
85423190
Features
Description
Designed specifically to address high-end embedded
applications, the PowerPC 440GX (PPC440GX)
provides a high-performance, low power solution that
interfaces to a wide range of peripherals by
incorporating on-chip power management features
and lower power dissipation.
This chip contains a high-performance RISC
processor core, DDR SDRAM controller, configurable
256KB SRAM to be used as L2 cache or software-
controlled on-chip memory, PCI-X bus interface,
Gigabit Ethernet interfaces, TCP/IP acceleration
hardware, I2O messaging unit, control for external
ROM and peripherals, DMA with scatter-gather
support, serial ports, IIC interface, and general
purpose I/O.
AMCC
440GX
Power PC 440GX Embedded Processor
• PowerPC
• On-chip 256KB SRAM configurable as L2 Code
• Selectable processor:bus clock ratios (Refer to the
• Double Data Rate (DDR) Synchronous DRAM
• External Peripheral Bus (32 bits) for up to eight
• DMA support for external peripherals, internal
• PCI-X V1.0a interface (32 or 64 bits, up to
• Two Ethernet 10/100/1000Mbps half- or full-
667MHz with 32KB I- and D-caches (with parity
checking)
store or Ethernet Packet store memory
Clocking chapter in the PPC440GX Embedded
Processor User’s Manual for details)
(SDRAM) interface operating up to 166MHz
devices with external mastering
UART and memory
133MHz) with support for conventional PCI V2.3
duplex interfaces. Operational modes supported
are SMII, GMII, RGMII, TBI and RTBI.
®
440 processor core operating up to
Technology: CMOS Cu-11, 0.13μm
Packages: 25mm, 552-ball Ceramic Ball Grid Array
(CBGA) or Plastic Ball Grid Array (PBGA) in standard
or RoHS compliant versions
Power (estimated): Less than:
Supply voltages required: 3.3V, 2.5V, 1.5V
• TCP/IP Acceleration Hardware (TAH) provided for
• Programmable Interrupt Controller supports
• I2O Messaging unit for message transfer between
• Programmable General Purpose Timers (GPT)
• Two serial ports (16750 compatible UART)
• Two IIC interfaces
• General Purpose I/O (GPIO) interface available
• JTAG interface for board level testing
• Processor can boot from PCI memory
• Available in ceramic (RoHs and non-RoHS
10/100/1000 Mbps ports that performs checksum
processing, TCP segmentation, and includes
support for jumbo frames
interrupts from a variety of sources.
the CPU and PCI-X
compliant versions) and plastic packages (RoHS
and non-RoHS compliant versions).
4W typical @533MHz
5W typical @667MHz
Revision 1.20 – June 9, 2009
Part Number 440GX
Data Sheet
1