AM79213 Legerity, AM79213 Datasheet - Page 25

• Manufacturer Part Number: AM79213
• Description: (AM79C203/031 / AM79213) PCM CODEC
• Manufacturer: Legerity

In the following section, the transmit path is defined as the section between the analog input to the ASLAC device
(VIN) and the PCM voice output of the ASLAC device A-law/µ-law speech compressor (shown in the technical overview
document). The receive path is defined as the section between the PCM voice input to the ASLAC device speech
expander and the analog output of the ASLAC device (VOUT). All limits defined in this section are tested with B = 0,
Z = 0 and X = R = RG = 1.
When RG is enabled, a nominal gain of –6.02 dB is added to the digital section of the receive path.
When AR is enabled, a nominal gain of –6.02 dB is added to the analog section of the receive path.
When AX is enabled, a nominal gain of +6.02 dB is added to the analog section of the transmit path.
When the gains in the transmit path are set to AX = 0 dB and GX = 0 dB, a 1014 Hz sine wave with a nominal voltage
of 0.596 Vrms for µ-law and 0.6 Vrms for A-law at the ASLAC device analog input will correspond to a level of 0
dBm0 at the PCM voice output. Under these conditions, the overload level of the transmit path is 1.25 Vpeak referenced
to VREF.
When the gains in the receive path are set to AR = GR = 0 dB, a 1014 Hz sine wave with a level of 0 dBm0 at the
PCM voice input will correspond to a nominal voltage of 0.596 Vrms for µ-law and 0.6 Vrms for A-law at the analog
output of the ASLAC device. Under these conditions, the maximum receive output level is 1.25 Vpeak referenced
to VREF.
When relative levels (dBm0) are used in any of the following transmission characteristics, the specification holds for
any setting of (AX + GX) gain from 0 to 12 dB or (AR + GR + RG) from 0 to –12 dB.
These transmission characteristics are valid for 0°C to 70°C and for VCC = +5 V ± 0.25 V.
ASLIC/ASLAC Products
25