C505_9708 SIEMENS [Siemens Semiconductor Group], C505_9708 Datasheet - Page 209

• Manufacturer Part Number: C505_9708
• Description: 8-Bit CMOS Microcontroller
• Manufacturer: SIEMENS [Siemens Semiconductor Group]

Notes:
1) V
2) During the sample time the input capacitance C
3) This parameter includes the sample time t
4) T
5) During the conversion the ADC’s capacitance must be repeatedly charged or discharged. The internal
6) Not 100% tested, but guaranteed by design characterization.
Semiconductor Group
these cases will be 00
internal resistance of the analog source must allow the capacitance to reach their final voltage level within t
After the end of the sample time t
result.
conversion clock t
guaranteed by design characterization for all other voltages within the defined voltage range.
If an overload condition occurs on maximum 2 unused analog input pins and the absolute sum of input
overload currents on all analog input pins does not exceed 10 mA, an additional conversion error of 1/2 LSB
is permissible.
resistance of the reference source must allow the capacitance to reach their final voltage level within the
indicated time. The maximum internal resistance results from the programmed conversion timing.
UE
AIN
(max.) is tested at –40
may exeed V
ADC
AGND
H
depend on programming and can be taken from the table on the previous page.
or FF
or V
H
AREF
, respectively.
T
A
S
, changes of the analog input voltage have no effect on the conversion
up to the absolute maximum ratings. However, the conversion result in
125 C ; V
S
, the time for determining the digital result. Values for the
AIN
CC
10-5
must be charged/discharged by the external source. The
5.5 V; V
AREF
V
CC
Device Specifications
+ 0.1 V and V
C505 / C505C
SS
1997-08-01
V
AGND
. It is
S
.