njg1666md7 New Japan Radio Co.,Ltd, njg1666md7 Datasheet - Page 3

• Manufacturer Part Number: njg1666md7
• Description: Spdt Switch Gaas Mmic
• Manufacturer: New Japan Radio Co.,Ltd

! TERMINAL INFORMATION
1,4,8,11
3,5,7,
9,13
No.
10
12
14
2
6
SYMBOL
(GND)
GND
VDD
CTL
NC
PC
P2
P1
This port is connected to PC port by applying the control voltage 0~+0.4
V(V
bias voltage of internal circuit.
Common RF port. This PC port is connected to P1 or P2 by logical
control voltage of 14th pin. In order to block DC bias voltage of internal
circuit, an external capacitor is required.
This port is connected to PC port by applying control voltage of
+1.3~+4.5 V (V
block the DC bias voltage of internal circuit.
A supply voltage terminal (+2.0~+4.5 V). Place a bypass capacitor
between this terminal and ground plane for avoiding RF noise from
outside.
Control signal input terminal. This terminal is set to High-Level
(+1.3~+4.5 V) or Low-Level (0~+0.4 V).
No connected terminal. This terminal is not connected with internal
circuit. Connect to the PCB ground plane.
Ground terminal. Connect this terminal with ground plane as close as
possible for excellent RF performance.
CTL(L)
) to 14th pin. An external capacitor is required to block the DC
CTL(H)
) to 14th pin. An external capacitor is required to
DESCRIPTION
NJG1666MD7
- 3 -