msm7586-01 Oki Semiconductor, msm7586-01 Datasheet - Page 9

• Manufacturer Part Number: msm7586-01
• Description: Shift Qpsk Modem/adpcm Codec
• Manufacturer: Oki Semiconductor

¡ Semiconductor
RXD, RXC, RXSC
Receive data and receive clock outputs.
When the modem unit is powered on, RXD, RXC and RXSC are selected based on SLS as shown
in Figure 3. These outputs are used by the clock regenerator circuit.
SLS
Receive side operation slot selection signal.
This device has two clock regenerator circuits and two AFC data memory registers. If SLS is "0",
slot 1 is selected, if SLS is "1", slot 2 is selected.
RPR
High-speed phase clock control signal input for the clock recovery circuit.
If this pin is at "0", the circuit is always in the low-speed phase clock mode. If this pin is at "1",
the clock recovery circuit enters the high-speed phase clock mode. When the phase difference
is less than a defined value, the circuit shifts to the low-speed phase clock mode automatically.
RXD
RXC
RXSC
SLS
Figure 3 Timing Diagram of RXD, RXC, and RXSC
1 Symbol
The regenerated data and clock are
selected asynchronously by the SLS signal.
MSM7586-01/03
9/42