dsp56854 Freescale Semiconductor, Inc, dsp56854 Datasheet - Page 58

• Manufacturer Part Number: dsp56854
• Description: 16-bit Digital Signal Controllers
• Manufacturer: Freescale Semiconductor, Inc

58
•
•
•
•
•
•
Consider all device loads as well as parasitic capacitance due to PCB traces when calculating capacitance.
This is especially critical in systems with higher capacitive loads that could create higher transient currents
in the V
All inputs must be terminated (i.e., not allowed to float) using CMOS levels.
Take special care to minimize noise levels on the V
When using Wired-OR mode on the SPI or the IRQx pins, the user must provide an external pull-up device.
Designs that utilize the TRST pin for JTAG port or Enhance OnCE module functionality (such as
development or debugging systems) should allow a means to assert TRST whenever RESET is asserted, as
well as a means to assert TRST independently of RESET. Designs that do not require debugging
functionality, such as consumer products, should tie these pins together.
The internal POR (Power on Reset) will reset the part at power on with reset asserted or pulled high but
requires that TRST be asserted at power on.
DD
and GND circuits.
56854 Technical Data, Rev. 6
DDA
and V
SSA
pins.
Freescale Semiconductor