AD8041 Analog Devices, AD8041 Datasheet - Page 5

• Manufacturer Part Number: AD8041
• Description: 160 MHz Rail-to-Rail Amplifier with Disable
• Manufacturer: Analog Devices

Specifications of AD8041

• Vcc-vee: 3V to 12V
• Isy Per Amplifier: 6.5mA
• Packages: SOIC,DIP
• -3db Bandwidth: 170MHz
• Slew Rate: 170V/µs
• Vos: 2mV
• Ib: 1.2µA
• # Opamps Per Pkg: 1
• Input Noise (nv/rthz): 16nV/rtHz

ABSOLUTE MAXIMUM RATINGS
Supply Voltage ............................................................ 12.6 V
Internal Power Dissipation
Input Voltage (Common Mode) ...................................... ± V
Differential Input Voltage ........................................... ± 3.4 V
Output Short-Circuit Duration
Storage Temperature Range N, R .............. –65°C to +125°C
Operating Temperature Range (A Grade) ... –40°C to +85°C
Lead Temperature Range (Soldering 10 sec) ............... 300°C
NOTES
1
2
MAXIMUM POWER DISSIPATION
The maximum power that can be safely dissipated by the
AD8041 is limited by the associated rise in junction temperature.
The maximum safe junction temperature for plastic encapsulated
devices is determined by the glass transition temperature of the
plastic, approximately 150°C. Exceeding this limit temporarily
may cause a shift in parametric performance due to a change in
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although the
AD8041 features proprietary ESD protection circuitry, permanent damage may occur on devices
subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended
to avoid performance degradation or loss of functionality.
REV. B
Stresses above those listed under Absolute Maximum Ratings may cause perma-
Specification is for the device in free air:
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
8-Lead PDIP Package: θ
8-Lead SOIC Package: θ
PDIP Package (N) .................................................... 1.3 W
SOIC Package (R) .................................................... 0.9 W
.......................................... Observe Power Derating Curves
Model
AD8041AN
AD8041AR
AD8041AR-REEL
AD8041AR-REEL7
AD8041ARZ-REEL
5962-9683901MPA
NOTES
1
2
The Z indicates a lead-free product.
Refer to official DSCC drawing for tested specifications.
JA
JA
= 90°C/W.
= 155°C/W.
2
1
2
1
Temperature
Range
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–55°C to +125°C
ORDERING GUIDE
S
–5–
the stresses exerted on the die by the package. Exceeding a
junction temperature of 175°C for an extended period can result
in device failure.
While the AD8041 is internally short-circuit protected, this may
not be sufficient to guarantee that the maximum junction tem-
perature (150°C) is not exceeded under all conditions. To
ensure proper operation, it is necessary to observe the maximum
power derating curves.
Figure 3. Maximum Power Dissipation vs. Temperature
Package
Description
8-Lead PDIP
8-Lead Plastic SOIC
13" Tape and Reel
7" Tape and Reel
13" Tape and Reel
8-Lead CERDIP
2.0
1.5
1.0
0.5
0
–50
–40 –30 –20 –10 0
8-LEAD SOIC PACKAGE
AMBIENT TEMPERATURE ( C)
8-LEAD PDIP PACKAGE
10 20 30
Package
Options
N-8
R-8
R-8
R-8
R-8
Q-8
40
50 60 70 80
T
J
= 150 C
AD8041
90