PCF8573P NXP Semiconductors, PCF8573P Datasheet - Page 22

• Manufacturer Part Number: PCF8573P
• Manufacturer: NXP Semiconductors

Specifications of PCF8573P

• Time Format: HH:MM:SS
• Package Type: PDIP
• Operating Temperature Classification: Industrial
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Pin Count: 16
• Mounting: Through Hole
• Lead Free Status / Rohs Status: Compliant

Philips Semiconductors
16.4
Notes
1. For more detailed information on the BGA packages refer to the “(LF)BGA Application Note ” (AN01026); order a copy
2. All surface mount (SMD) packages are moisture sensitive. Depending upon the moisture content, the maximum
3. For SDIP packages, the longitudinal axis must be parallel to the transport direction of the printed-circuit board.
4. These packages are not suitable for wave soldering. On versions with the heatsink on the bottom side, the solder
5. If wave soldering is considered, then the package must be placed at a 45 angle to the solder wave direction.
6. Wave soldering is suitable for LQFP, QFP and TQFP packages with a pitch (e) larger than 0.8 mm; it is definitely not
7. Wave soldering is suitable for SSOP and TSSOP packages with a pitch (e) equal to or larger than 0.65 mm; it is
2003 Jan 27
Through-hole mount DBS, DIP, HDIP, SDIP, SIL
Surface mount
Clock/calendar with serial I/O
from your Philips Semiconductors sales office.
temperature (with respect to time) and body size of the package, there is a risk that internal or external package
cracks may occur due to vaporization of the moisture in them (the so called popcorn effect). For details, refer to the
Drypack information in the “Data Handbook IC26; Integrated Circuit Packages; Section: Packing Methods” .
cannot penetrate between the printed-circuit board and the heatsink. On versions with the heatsink on the top side,
the solder might be deposited on the heatsink surface.
The package footprint must incorporate solder thieves downstream and at the side corners.
suitable for packages with a pitch (e) equal to or smaller than 0.65 mm.
definitely not suitable for packages with a pitch (e) equal to or smaller than 0.5 mm.
MOUNTING
Suitability of IC packages for wave, reflow and dipping soldering methods
BGA, LBGA, LFBGA, SQFP, TFBGA, VFBGA not suitable
HBCC, HBGA, HLQFP, HSQFP, HSOP,
HTQFP, HTSSOP, HVQFN, HVSON, SMS
PLCC
LQFP, QFP, TQFP
SSOP, TSSOP, VSO
(5)
, SO, SOJ
PACKAGE
(1)
22
suitable
not suitable
suitable
not recommended
not recommended
(3)
WAVE
(4)
SOLDERING METHOD
(5)(6)
(7)
suitable
suitable
suitable
suitable
suitable
REFLOW
Product specification
PCF8573
(2)
DIPPING
suitable