SI2457-D-FS Silicon Laboratories Inc, SI2457-D-FS Datasheet - Page 107
SI2457-D-FS
Manufacturer Part Number
SI2457-D-FS
Description
IC ISOMODEM SYSTEM-SIDE 16SOIC
Manufacturer
Silicon Laboratories Inc
Specifications of SI2457-D-FS
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
- Current page: 107 of 304
- Download datasheet (5Mb)
U63 (DAAC2) is a bit-mapped register with bits 3:0 reserved and should be modified through a read-modify-write
operation.
Bits 15:8 (LCS) function as an 8-bit unsigned measure of off-hook loop current with a resolution of 1.1 mA/bit.
Bits 7:4 (ACT) set the ac termination the Si3010/Si3018 presents to Tip and Ring. The ac impedance setting is
dictated by the certification requirements for the country in which the modem is used.
U65 (DAAC4) is a bit-mapped register with bits 3:0, 12:5, and 15 reserved. Bits 1:0 and 6:5 must not be changed.
Bit 14 (PWMG) = 0 (default) provides 0 dB gain to AOUT. PWMG = 1 provides a 6 dB gain to AOUT.
Bit 13 (PDN) = 0 enables the device for normal operation. PDN = 1 completely powers down both the Si3018/10
and the Si24xx chips. The bit takes effect at the carriage return of the AT command setting this bit high. Once this
bit is set, the modem must be reset via the RESET pin to become active. When reset, the modem reverts to the
default settings.
Bit 4 (PDL) = 0 (default) enables the device for normal operation. PDL = 1 powers the Si3018/10 down. This is a
test mode typically used for board-level debugging, not normal modem operation.
U65 resets to 0x00E0 with a power-on or manual reset.
Bit
15
14
13
4
3
2
1
0
15:8
Bit
7:4
3:0
Reserved Read returns zero.
PWMG
Reserved
Reserved
Reserved
Name
PDN
FOH
DL
Reserved Read returns 0011.
Name
LCS
ACT
Function
PWM gain.
0 = No gain.
1 = 6 dB gain applied to AOUT.
Power Down.
0 = Normal.
1 = Power Down.
Must be set to zero.
Must be set to zero.
0 = Automatic calibration timer set to 426 ms.
1 = Automatic calibration timer set to 106 ms.
0 = Digital loopback beyond ISOcap interface.
1 = Digital loopback across ISOcap interface only.
Must be set to zero.
Off-hook loop current (1.1 mA/bit).
AC Termination Select
ACT AC Termination
0000
0011
0100
1111
Table 63. U62 Bit Map (Continued)
Real 600
220 + (820 || 120 nF) and 220 + (820 || 115 nF)
370 + (620 || 310 nF)
Global complex impedance
Table 65. U65 Bit Map
Table 64. U63 Bit Map
Rev. 1.3
Function
AN93
107
Related parts for SI2457-D-FS
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
TSSOP 24/C°/56 KBPS, V.90 ISOMODEM SYSTEM-SIDE
Manufacturer:
Silicon Laboratories Inc
Part Number:
Description:
TSSOP 24/I°/56 KBPS, V.90 ISOMODEM SYSTEM-SIDE
Manufacturer:
Silicon Laboratories Inc
Part Number:
Description:
IC ISOMODEM SYSTEM-SIDE 16SOIC
Manufacturer:
Silicon Laboratories Inc
Datasheet:
Part Number:
Description:
IC ISOMODEM SYSTEM-SIDE 24TSSOP
Manufacturer:
Silicon Laboratories Inc
Datasheet:
Part Number:
Description:
IC ISOMODEM SYSTEM-SIDE 24TSSOP
Manufacturer:
Silicon Laboratories Inc
Datasheet:
Part Number:
Description:
Manufacturer:
Silicon Laboratories Inc
Datasheet:
Part Number:
Description:
IC ISOMODEM SYSTEM-SIDE 24TSSOP
Manufacturer:
Silicon Laboratories Inc
Datasheet:
Part Number:
Description:
SMD/C°/SINGLE-ENDED OUTPUT SILICON OSCILLATOR
Manufacturer:
Silicon Laboratories Inc
Part Number:
Description:
Manufacturer:
Silicon Laboratories Inc
Datasheet:
Part Number:
Description:
N/A N/A/SI4010 AES KEYFOB DEMO WITH LCD RX
Manufacturer:
Silicon Laboratories Inc
Datasheet:
Part Number:
Description:
N/A N/A/SI4010 SIMPLIFIED KEY FOB DEMO WITH LED RX
Manufacturer:
Silicon Laboratories Inc
Datasheet:
Part Number:
Description:
N/A/-40 TO 85 OC/EZLINK MODULE; F930/4432 HIGH BAND (REV E/B1)
Manufacturer:
Silicon Laboratories Inc