MCP23S09-E/MG Microchip Technology, MCP23S09-E/MG Datasheet - Page 3

• Manufacturer Part Number: MCP23S09-E/MG
• Description: IC I/O EXPANDER SPI 8B 16QFN
• Manufacturer: Microchip Technology
• Type: I/O Expanderr

Specifications of MCP23S09-E/MG

• Package / Case: 16-QFN
• Interface: SPI
• Number Of I /o: 8
• Interrupt Output: Yes
• Frequency - Clock: 10MHz
• Voltage - Supply: 1.8 V ~ 5.5 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Chip Configuration: 8 Bit
• Bus Frequency: 10MHz
• Ic Interface Type: SPI
• No. Of I/o's: 8
• Supply Voltage Range: 1.8V To 5.5V
• Digital Ic Case Style: QFN
• No. Of Pins: 16
• Interface Type: SPI
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

1.0
The MCP23X09 device provides 8-bit, general purpose
parallel I/O expansion for I
The two devices differ only in the serial interface.
• MCP23009 - I
• MCP23S09 - SPI interface
The MCP23X09 consists of multiple 8-bit configuration
registers for input, output and polarity selection. The
system master can enable the I/Os as either inputs or
outputs by writing the I/O configuration bits. The data
for each input or output is kept in the corresponding
input or output register. The polarity of the input port
register can be inverted with the polarity inversion
register. All registers can be read by the system master.
The interrupt output can be configured to activate
under two conditions (mutually exclusive):
1.
2.
The Interrupt Capture register captures port values at
the time of the interrupt, thereby saving the condition
that caused the interrupt.
The Power-on Reset (POR) sets the registers to their
default values and initializes the device state machine.
The hardware address pin is used to determine the
device address.
© 2009 Microchip Technology Inc.
When
corresponding input port register state. This is
used to indicate to the system master that an
input state has changed.
When
pre-configured
register).
DEVICE OVERVIEW
any
an
2
C interface
input
input
register
state
state
2
C bus or SPI applications.
value
differs
differs
(DEFVAL
from
from
its
a
MCP23009/MCP23S09
DS22121B-page 3