17-21SYGC/S530-E2/TR8 Everlight Electronics CO., LTD, 17-21SYGC/S530-E2/TR8 Datasheet - Page 9

• Manufacturer Part Number: 17-21SYGC/S530-E2/TR8
• Description: EVL17-21SYGC/S530-E2/TR8 TOP VIEW, GREEN
• Manufacturer: Everlight Electronics CO., LTD

Specifications of 17-21SYGC/S530-E2/TR8

• Lead Free Status / Rohs Status: Vendor undefined / RoHS Compliant

4.Soldering Iron
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is often
started at the time of the hand solder.
5.Repairing
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Everlight Electronics Co., Ltd.
Device No. : DSE-171-103
Tucheng, Taipei 236, Taiwan, R.O.C
Repair should not be done after the LEDs have been soldered. When repairing is
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3
EVERLIGHT ELECTRONICS CO.,LTD.
Prepared date:27-Oct-2007
http://www.everlight.com
Tel: [phone]
Fax: [phone]
http://www.everlight.com
17-21SYGC/S530-XX/TR8
Rev. 2
Prepared by:Zhouhua
Page: 9 of 9