17-21SYGC/S530-E2/TR8 Everlight Electronics CO., LTD, 17-21SYGC/S530-E2/TR8 Datasheet - Page 8

• Manufacturer Part Number: 17-21SYGC/S530-E2/TR8
• Description: EVL17-21SYGC/S530-E2/TR8 TOP VIEW, GREEN
• Manufacturer: Everlight Electronics CO., LTD

Specifications of 17-21SYGC/S530-E2/TR8

• Lead Free Status / Rohs Status: Vendor undefined / RoHS Compliant

1. Over-current-proof
2. Storage
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Precautions For Use
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package : The LEDs should be kept at 30℃ or less and 70%RH or less(Floor life).
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
3. Soldering Condition
Everlight Electronics Co., Ltd.
Device No. : DSE-171-103
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
However, it's recommended that the LEDs should be used within 168 hours (7 days) after opening
the package. If unused LEDs remain, it should be stored in moisture proof packages.
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
EVERLIGHT ELECTRONICS CO.,LTD.
Prepared date:27-Oct-2007
http://www.everlight.com
17-21SYGC/S530-XX/TR8
Rev. 2
Prepared by:Zhouhua
Page: 8 of 9