EP1S25F1020I6 Altera, EP1S25F1020I6 Datasheet - Page 141

• Manufacturer Part Number: EP1S25F1020I6
• Description: IC STRATIX FPGA 25K LE 1020-FBGA
• Manufacturer: Altera
• Series: Stratix®r

Specifications of EP1S25F1020I6

• Number Of Logic Elements/cells: 25660
• Number Of Labs/clbs: 2566
• Total Ram Bits: 1944576
• Number Of I /o: 706
• Voltage - Supply: 1.425 V ~ 1.575 V
• Mounting Type: Surface Mount
• Operating Temperature: -40°C ~ 100°C
• Package / Case: 1020-FBGA
• Family Name: Stratix
• Number Of Logic Blocks/elements: 25660
• # I/os (max): 706
• Frequency (max): 450.05MHz
• Process Technology: 0.13um (CMOS)
• Operating Supply Voltage (typ): 1.5V
• Logic Cells: 25660
• Ram Bits: 1944576
• Operating Supply Voltage (min): 1.425V
• Operating Supply Voltage (max): 1.575V
• Operating Temp Range: -40C to 100C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 1020
• Package Type: FC-FBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Not Compliant

Altera Corporation
July 2005
SSTL-3 Class II
AGP (1× and 2× )
CTT
Table 2–32. I/O Support by Bank (Part 2 of 2)
I/O Standard
Each I/O bank has its own VCCIO pins. A single device can support 1.5-,
1.8-, 2.5-, and 3.3-V interfaces; each bank can support a different standard
independently. Each bank also has dedicated VREF pins to support any
one of the voltage-referenced standards (such as SSTL-3) independently.
Each I/O bank can support multiple standards with the same V
input and output pins. Each bank can support one voltage-referenced
I/O standard. For example, when V
LVTTL, LVCMOS, 3.3-V PCI, and SSTL-3 for inputs and outputs.
Differential On-Chip Termination
Stratix devices provide differential on-chip termination (LVDS I/O
standard) to reduce reflections and maintain signal integrity. Differential
on-chip termination simplifies board design by minimizing the number
of external termination resistors required. Termination can be placed
inside the package, eliminating small stubs that can still lead to
reflections. The internal termination is designed using transistors in the
linear region of operation.
Stratix devices support internal differential termination with a nominal
resistance value of 137.5 Ω for LVDS input receiver buffers. LVPECL
signals require an external termination resistor.
device with differential termination.
Top & Bottom Banks
(3, 4, 7 & 8)
v
v
v
Left & Right Banks
(1, 2, 5 & 6)
v
v
CCIO
Stratix Device Handbook, Volume 1
is 3.3 V, a bank can support
Figure 2–71
Enhanced PLL External
Clock Output Banks
(9, 10, 11 & 12)
Stratix Architecture
v
v
v
shows the
CCIO
2–127
for