EPM3256AQC208-10N Altera, EPM3256AQC208-10N Datasheet - Page 12

• Manufacturer Part Number: EPM3256AQC208-10N
• Description: IC MAX 3000A CPLD 256 208-PQFP
• Manufacturer: Altera
• Series: MAX® 3000Ar

Specifications of EPM3256AQC208-10N

• Programmable Type: In System Programmable
• Delay Time Tpd(1) Max: 10.0ns
• Voltage Supply - Internal: 3 V ~ 3.6 V
• Number Of Logic Elements/blocks: 16
• Number Of Macrocells: 256
• Number Of Gates: 5000
• Number Of I /o: 158
• Operating Temperature: 0°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 208-MQFP, 208-PQFP
• Voltage: 3.0 V ~ 3.6 V
• Memory Type: EEPROM
• Number Of Logic Elements/cells: 16
• Family Name: MAX 3000A
• # Macrocells: 256
• Number Of Usable Gates: 5000
• Frequency (max): 125MHz
• Propagation Delay Time: 10ns
• Number Of Logic Blocks/elements: 16
• # I/os (max): 158
• Operating Supply Voltage (typ): 3.3V
• In System Programmable: Yes
• Operating Supply Voltage (min): 3V
• Operating Supply Voltage (max): 3.6V
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 208
• Package Type: PQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Compliant
• Other names: 544-1988; EPM3256AQC208-10N

MAX 3000A Programmable Logic Device Family Data Sheet
Figure 6. I/O Control Block of MAX 3000A Devices
Note:
(1)
12
EPM3032A, EPM3064A, EPM3128A, and EPM3256A devices have six output enables. EPM3512A devices have
10 output enables.
PIA
When the tri–state buffer control is connected to ground, the output is
tri-stated (high impedance), and the I/O pin can be used as a dedicated
input. When the tri–state buffer control is connected to V
enabled.
The MAX 3000A architecture provides dual I/O feedback, in which
macrocell and pin feedbacks are independent. When an I/O pin is
configured as an input, the associated macrocell can be used for buried
logic.
from
Macrocell
to PIA
to Other I/O Pins
Open-Drain Output
Slew-Rate Control
6 or 10 Global
Output Enable Signals (1)
GND
VCC
OE Select Multiplexer
Altera Corporation
CC
, the output is