NL8060BC26-17 NEC Electronics, NL8060BC26-17 Datasheet - Page 2

• Manufacturer Part Number: NL8060BC26-17
• Manufacturer: NEC Electronics

Specifications of NL8060BC26-17

• Lead Free Status / Rohs Status: Not Compliant

STRUCTURE AND FUNCTION
driving the TFT array, and a backlight assembly. The TFT panel structure is created by sandwiching liquid crystal
material in the narrow gap between a TFT array glass substrate and a color filter glass substrate. After the driver
LSIs are connected to the panel, the backlight assembly is attached to the back side of the panel.
addressing by the onboard signal processor and sent to the driver LSIs, which in turn address the individual TFT
cells.
when activated by the data source. By regulating the amount of light passing through the array of red, green,
and blue dots, color images are created with clarity.
CHARACTERISTICS
2
A color TFT (thin film transistor) LCD module is comprised of a TFT liquid crystal panel structure, LSIs for
RGB (red, green, blue) data signals from a source system are modulated into a form suitable for active-matrix
Acting as an electro-optical switch, each TFT cell regulates light transmission from the backlight assembly
Display area
Drive system
Display colors
Number of pixels
Pixel arrangement
Pixel pitch
Module size
Weight
Contrast ratio
Viewing angle (more than the contrast ratio of 10:1)
Designed viewing direction
Color gamut
Response time
Luminance
Signal system
Supply voltage
Backlight
Power consumption
(at room temperature)
211.2 (H) × 158.4 (V) mm
a-Si TFT active matrix
262,144 colors
800 × 600 pixels
RGB vertical stripe
0.264 (H) × 0.264 (V) mm
243.0 (H) × 185.1 (V) × 11.5 max. (D) mm
520 (typ.)
300:1 (typ.)
Horizontal: 50° (typ. left side, right side)
Vertical:
• Wider viewing angle with
• Wider viewing angle without image reversal: up side
• Optimum gray-scale (γ = 2.2):
43% (typ. center, to NTSC)
15 ms (max.), “white 100%” to “black 10%”
280 cd/m
6-bit digital signals for each of the RGB primary colors, synchronous signals
(Hsync, Vsync), dot clock (CLK)
3.3 V [5.0 V] (logic, LCD driving)
Edge light type, two cold cathode fluorescent lamps in a holder, attached
inverter
• Lamp holder set: Part no.104LHS31
• Recommended inverter: Part no. 104PWBR1
7.0 W (typ. at 3.3 V, with recommended inverter)
Data Sheet EN0493EJ1V1DS00
2
(typ.) (lamp current: I
35° (typ. up side), 45° (typ. down side)
contrast ratio:
L
= 5 mA rms per lamp)
down side
(6 o’clock, normal scan)
up side
(12 o’clock, reverse scan)
(12 o’clock, normal scan)
down side
(6 o’clock, reverse scan)
perpendicular
NL8060BC26-17