CY8C5246AXI-038 Cypress Semiconductor Corp, CY8C5246AXI-038 Datasheet - Page 30

• Manufacturer Part Number: CY8C5246AXI-038
• Manufacturer: Cypress Semiconductor Corp

Specifications of CY8C5246AXI-038

• Lead Free Status / RoHS Status: Compliant

7. Digital Subsystem
The digital programmable system creates application specific
combinations of both standard and advanced digital peripherals
and custom logic functions. These peripherals and logic are then
interconnected to each other and to any pin on the device,
providing a high level of design flexibility and IP security.
The features of the digital programmable system are outlined
here to provide an overview of capabilities and architecture.
Designers do not need to interact directly with the programmable
digital system at the hardware and register level. PSoC Creator
provides a high level schematic capture graphical interface to
automatically place and route resources similar to PLDs.
The main components of the digital programmable system are:



Figure 7-1. CY8C52 Digital Programmable Architecture
7.1 Example Peripherals
The flexibility of the CY8C52 family’s UDBs and analog blocks
allow you to create a wide range of components (peripherals).
Document Number: 001-55034 Rev. *G
Universal digital blocks (UDB) - These form the core
functionality of the digital programmable system. UDBs are a
collection of uncommitted logic (PLD) and structural logic
(Datapath) optimized to create all common embedded
peripherals and customized functionality that are application or
design specific.
Universal digital block array - UDB blocks are arrayed within a
matrix of programmable interconnect. The UDB array structure
is homogeneous and allows for flexible mapping of digital
functions onto the array. The array supports extensive and
flexible routing interconnects between UDBs and the digital
system interconnect.
Digital system interconnect (DSI) - Digital signals from UDBs,
fixed function peripherals, I/O pins, interrupts, DMA, and other
system core signals are attached to the DSI to implement full
featured device connectivity. The DSI allows any digital function
to any pin or other feature routability when used with the UDB
array.
UDB
UDB
UDB
UDB
UDB
UDB
and Fixed Function Peripherals
and Fixed Function Peripherals
DSI Routing Interface
DSI Routing Interface
Digital Core System
Digital Core System
UDB
UDB
UDB
UDB
UDB
UDB
UDB
UDB
UDB
UDB
UDB
UDB
UDB
UDB
UDB
UDB
UDB
UDB
PRELIMINARY
The most common peripherals were built and characterized by
Cypress and are shown in the PSoC Creator component catalog.
However, you may also create your own custom components
using PSoC Creator. Using PSoC Creator, you may also create
their own components for reuse within their organization, for
example sensor interfaces, proprietary algorithms, and display
interfaces.
The number of components available through PSoC Creator is
too numerous to list in the datasheet, and the list is always
growing. An example of a component available for use in
CY8C52 family, but, not explicitly called out in this datasheet is
the UART component.
7.1.1 Example Digital Components
The following is a sample of the digital components available in
PSoC Creator for the CY8C52 family. The exact amount of
hardware resources (UDBs, routing, RAM, flash) used by a
component varies with the features selected in PSoC Creator for
the component.



7.1.2 Example Analog Components
The following is a sample of the analog components available in
PSoC Creator for the CY8C52 family. The exact amount of
hardware resources (SC/CT blocks, routing, RAM, flash) used
by a component varies with the features selected in PSoC
Creator for the component.



7.1.3 Example System Function Components
The following is a sample of the system function components
available in PSoC Creator for the CY8C52 family. The exact
amount of hardware resources (UDBs, routing, RAM, flash) used
by a component varies with the features selected in PSoC
Creator for the component.




Communications


Functions

Logic (x CPLD product terms per logic function)




ADC

DACs



Comparators
CapSense
LCD drive
LCD control
Filters
PSoC
I
UART (1 to 3 UDBs)
External memory interface (EMIF), 1 UDB)
NOT
OR
XOR
AND
Successive Approximation (SAR ADC)
Current
Voltage
PWM
2
C (1 to 3 UDBs)
®
5: CY8C52 Family Datasheet
Page 30 of 85
[+] Feedback