PIC18F25K80T-I/MM Microchip Technology, PIC18F25K80T-I/MM Datasheet - Page 447
![ECAN, 32KB Flash, 4KB RAM, 16 MIPS, 12-bit ADC, CTMU 28 QFN-S 6x6mm T/R](/photos/16/12/161267/qfn-28_sml.jpg)
PIC18F25K80T-I/MM
Manufacturer Part Number
PIC18F25K80T-I/MM
Description
ECAN, 32KB Flash, 4KB RAM, 16 MIPS, 12-bit ADC, CTMU 28 QFN-S 6x6mm T/R
Manufacturer
Microchip Technology
Series
PIC® XLP™ 18Fr
Datasheet
1.PIC18F25K80-ISO.pdf
(628 pages)
Specifications of PIC18F25K80T-I/MM
Core Processor
PIC
Core Size
8-Bit
Speed
64MHz
Connectivity
ECAN, I²C, LIN, SPI, UART/USART
Peripherals
Brown-out Detect/Reset, LVD, POR, PWM, WDT
Number Of I /o
24
Program Memory Size
32KB (16K x 16)
Program Memory Type
FLASH
Eeprom Size
1K x 8
Ram Size
3.6K x 8
Voltage - Supply (vcc/vdd)
1.8 V ~ 5.5 V
Data Converters
A/D 8x12b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
*
Processor Series
PIC18F25K80
Core
PIC
Data Bus Width
8 bit
Data Ram Size
3648 B
Interface Type
I2C, SPI
Maximum Clock Frequency
64 MHz
Number Of Programmable I/os
24
Number Of Timers
5
Operating Supply Voltage
1.8 V to 5.5 V
Maximum Operating Temperature
+ 125 C
Mounting Style
SMD/SMT
Minimum Operating Temperature
- 40 C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
PIC18F25K80T-I/MM
Manufacturer:
MICROCHIP
Quantity:
3 000
- Current page: 447 of 628
- Download datasheet (6Mb)
27.7
27.7.1
Of all receive buffers, the MAB is always committed to
receiving the next message from the bus. The MCU
can access one buffer while the other buffer is available
for message reception or holding a previously received
message.
When a message is moved into either of the receive
buffers, the associated RXFUL bit is set. This bit must
be cleared by the MCU when it has completed process-
ing the message in the buffer in order to allow a new
message to be received into the buffer. This bit
provides a positive lockout to ensure that the firmware
has finished with the message before the module
attempts to load a new message into the receive buffer.
If the receive interrupt is enabled, an interrupt will be
generated to indicate that a valid message has been
received.
Once a message is loaded into any matching buffer,
user firmware may determine exactly what filter caused
this reception by checking the filter hit bits in the
RXBnCON
FILHIT<2:0> of RXBnCON serve as filter hit bits. In
Mode 1 and 2, FILHIT<4:0> bits of BnCON serve as
filter hit bits. The same registers also indicate whether
the current message is an RTR frame or not. A
received message is considered a standard identifier
message if the EXID/EXIDE bit in the RXBnSIDL or the
BnSIDL register is cleared. Conversely, a set EXID bit
indicates an extended identifier message. If the
received message is a standard identifier message,
user firmware needs to read the SIDL and SIDH regis-
ters. In the case of an extended identifier message,
firmware should read the SIDL, SIDH, EIDL and EIDH
registers. If the RXBnDLC or BnDLC register contain
non-zero data count, user firmware should also read
the corresponding number of data bytes by accessing
the RXBnDm or the BnDm registers. When a received
message is an RTR, and if the current buffer is not con-
figured for automatic RTR handling, user firmware
must take appropriate action and respond manually.
Each receive buffer contains RXM bits to set special
Receive modes. In Mode 0, RXM<1:0> bits in
RXBnCON define a total of four Receive modes. In
Mode 1 and 2, RXM1 bit, in combination with the EXID
mask and filter bit, define the same four receive modes.
2011 Microchip Technology Inc.
Note:
Message Reception
RECEIVING A MESSAGE
The entire contents of the MAB are moved
into the receive buffer once a message is
accepted. This means that regardless of
the
extended) and the number of data bytes
received, the entire receive buffer is over-
written with the MAB contents. Therefore,
the contents of all registers in the buffer
must be assumed to have been modified
when any message is received.
or
type
BnCON
of
registers.
identifier
(standard
In
Mode
Preliminary
or
0,
PIC18F66K80 FAMILY
Normally, these bits are set to ‘ 00 ’ to enable reception
of all valid messages as determined by the appropriate
acceptance filters. In this case, the determination of
whether or not to receive standard or extended
messages is determined by the EXIDE bit in the accep-
tance filter register. In Mode 0, if the RXM bits are set
to ‘ 01 ’ or ‘ 10 ’, the receiver will accept only messages
with standard or extended identifiers, respectively. If an
acceptance filter has the EXIDE bit set, such that it
does not correspond with the RXM mode, that accep-
tance filter is rendered useless. In Mode 1 and 2,
setting EXID in the SIDL Mask register will ensure that
only standard or extended identifiers are received.
These two modes of RXM bits can be used in systems
where it is known that only standard or extended mes-
sages will be on the bus. If the RXM bits are set to ‘ 11 ’
(RXM1 = 1 in Mode 1 and 2), the buffer will receive all
messages regardless of the values of the acceptance
filters. Also, if a message has an error before the end
of frame, that portion of the message assembled in the
MAB before the error frame will be loaded into the buf-
fer. This mode may serve as a valuable debugging tool
for a given CAN network. It should not be used in an
actual system environment as the actual system will
always have some bus errors and all nodes on the bus
are expected to ignore them.
In Mode 1 and 2, when a programmable buffer is
configured as a transmit buffer and one or more accep-
tance filters are associated with it, all incoming messages
matching this acceptance filter criteria will be discarded.
To avoid this scenario, user firmware must make sure
that there are no acceptance filters associated with a
buffer configured as a transmit buffer.
27.7.2
When in Mode 0, RXB0 is the higher priority buffer and
has two message acceptance filters associated with it.
RXB1 is the lower priority buffer and has four acceptance
filters associated with it. The lower number of acceptance
filters makes the match on RXB0 more restrictive and
implies a higher priority for that buffer. Additionally, the
RXB0CON register can be configured such that if RXB0
contains a valid message and another valid message is
received, an overflow error will not occur and the new
message will be moved into RXB1 regardless of the
acceptance criteria of RXB1. There are also two
programmable acceptance filter masks available, one for
each receive buffer (see
Buffers”
In Mode 1 and 2, there are a total of 16 acceptance
filters available and each can be dynamically assigned
to any of the receive buffers. A buffer with a lower
number has higher priority. Given this, if an incoming
message matches with two or more receive buffer
acceptance criteria, the buffer with the lower number
will be loaded with that message.
).
RECEIVE PRIORITY
Section 27.5 “CAN Message
DS39977C-page 447
Related parts for PIC18F25K80T-I/MM
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![TC1014-2.7VCT](/images/manufacturer_photos/0/4/440/microchip_technology_inc__tmb.jpg)
Part Number:
Description:
Manufacturer:
Microchip Technology Inc.
Datasheet:
![TC1014-5.0VCT](/images/manufacturer_photos/0/4/440/microchip_technology_inc__tmb.jpg)
Part Number:
Description:
Manufacturer:
Microchip Technology Inc.
Datasheet:
![TC1055-2.5VCT](/images/manufacturer_photos/0/4/440/microchip_technology_inc__tmb.jpg)
Part Number:
Description:
Manufacturer:
Microchip Technology Inc.
Datasheet:
![TC1055-2.7VCT](/images/manufacturer_photos/0/4/440/microchip_technology_inc__tmb.jpg)
Part Number:
Description:
Manufacturer:
Microchip Technology Inc.
Datasheet:
![TC1055-2.8VCT](/images/manufacturer_photos/0/4/440/microchip_technology_inc__tmb.jpg)
Part Number:
Description:
Manufacturer:
Microchip Technology Inc.
Datasheet:
![TC1055-4.0VCT](/images/manufacturer_photos/0/4/440/microchip_technology_inc__tmb.jpg)
Part Number:
Description:
Manufacturer:
Microchip Technology Inc.
Datasheet:
![TC1186-2.5VCT](/images/manufacturer_photos/0/4/440/microchip_technology_inc__tmb.jpg)
Part Number:
Description:
Manufacturer:
Microchip Technology Inc.
Datasheet:
![TC1186-2.85VCT](/images/manufacturer_photos/0/4/440/microchip_technology_inc__tmb.jpg)
Part Number:
Description:
Manufacturer:
Microchip Technology Inc.
Datasheet: