5536607-1 TE Connectivity, 5536607-1 Datasheet - Page 2

• Manufacturer Part Number: 5536607-1
• Description: Conn Backplane RCP 8Power POS POS 2mm RA Thru-Hole
• Manufacturer: TE Connectivity
• Type: Backplaner
• Series: Z-PACKr

Specifications of 5536607-1

• Pitch: 2 mm
• Number Of Rows: 4
• Number Of Contacts: 8Power POS
• Mounting: Through Hole
• Contact Plating: Gold Over Palladium Nickel
• Gender: RCP
• Body Orientation: Right Angle
• Housing Material: Liquid Cryst Polymer
• Number Of Ports: 1Port
• Number Of Terminals: 24
• Pitch (mm): 2mm
• Contact Material: Phosphor Bronze
• Voltage Rating Max: 30VAC
• Mounting Style: Through Hole
• Termination Method: Solder
• Product Length (mm): 11.88mm
• Connector Type: Backplane
• Row Pitch: 2mm
• Pitch Spacing: 2mm
• No. Of Contacts: 8
• Contact Termination: Right Angle Through Hole
• No. Of Rows: 4
• Rohs Compliant: Yes
• Number Of Positions / Contacts: 8
• Termination Style: Solder
• Product Type: Connector
• Pcb Mounting Orientation: Right Angle
• Post Type: Solder Post
• Module Type: Power
• Number Of Power Positions: 8
• Voltage Rating (vac): 30
• Termination Post Length (mm [in]): 2.73 [0.107]
• Sequencing: No
• Post Plating: Tin
• Centerline, Matrix (mm [in]): 2.00 x 2.00 [.079 x .079]
• Contact Type: Socket
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold, Gold or Gold Flash over Palladium Nickel
• Connector Style: Receptacle
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C, Reflow solder capable to 245°C, Reflow solder capable to 260°C, Pin-in-Paste capable to 245°C, Pin-in-Paste capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board
• Application: Free-Board
• Lead Free Status / RoHS Status: Compliant
• Lead Free Status / RoHS Status: Compliant

MULTI-BEAM XL Connector
■
■
■
■
Evolution of MULTI-BEAM Power Contacts
Dual-Beam Contact
■
■
Contact Wipe
Product Configurations and Part Numbers
The connector configuration is described by reading Left-to-Right on the Plug mating interface and Right-to-Left on the
Receptacle mating interface. Custom configurations can be produced due to the modular design of the product.
Configuration Description: ACP indicates AC Power, P indicates DC Power, HDP indicates High Density Power, LP
indicates Low Power (MULTI-BEAM XLE connector only), S indicates Signal. The corresponding contact spacing and
voltage ratings are shown below.
* With circuit board designed to UL 1950, IEC 60950
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Original design
.017" thick stock
0.300′′ [7.62 mm] spacing
Expandable length to accommodate up to 36 power contacts
Contact spacings are expandable to accommodate higher
voltages and/or higher current requirements
4-beam or dual beam power contacts available
Base metal made from high conductivity copper alloy
(over 98% copper) offers superior performance compared to
alternative materials
300 Volts*
ACP
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
0.250′′ [6.35 mm] spacing
4-Beam Contact
■
■
■
■
■
Power Connectors & Interconnection Systems
MULTI-BEAM XL and MULTI-BEAM XLE Power Distribution Connector Systems
Power (or GND) Contact
Power Contact
Signal Contact
Signal (trigger) Contact
The MLBF power contact and the Standard Signal contact are sequenced to mate at the same time ... sequence #2.
.017" thick stock
35A current rating
Features eight
independent beams
Parallel current paths
yield a lower contact
resistance
Tuned beam design
provides lower mating
forces and higher
durability life cycles
200 Volts*
Contact Type
P
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Connection to same voltage*
0.200′′ [5.08 mm] spacing
3-Beam Contact
■
■
■
■
■
Offered on new
MULTI-BEAM XLE
connector
.020" Thick Stock
50A Current Rating
Improved design offers
lowest mating force
available in MULTI-BEAM
product line
True hot-plug design
preserves the separable
contact interface to
provide long term
reliability after hot-mate
and un-mate cycles
HDP
MULTI-BEAM XLE Connector
■
■
■
■
■
Break Last (MFBL)
Break First (MLBF)
Description
Features new 3-beam power contact
Two hot-pluggable power contacts to choose from:
■
■
Slimmer housing design allows 40% more current in the
same space
Over 40% lower mating force than original MULTI-BEAM XL
connector
Vented housing allows for better air flow
Make First
Make Last
Standard
Standard
50A High power contact (35% increase compared to
MULTI-BEAM XL connector)
20A Low power contact (occupies 50% less PCB space
than MULTI-BEAM XL power contact)
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
.115′′ [3.81 mm] spacing
200 Volts*
Sequence
LP
1
2
2
3
Power Contacts
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
Signal Contacts
0.200′′ [5.08 mm]
0.150′′ [3.81 mm]
0.150′′ [3.81 mm]
0.100′′ [2.54 mm]
0.100′′ [2.54 mm] grid
Minimum Wipe
60 Volts*
S
(Continued)
11