862425-1 TE Connectivity, 862425-1 Datasheet - Page 4

• Manufacturer Part Number: 862425-1
• Description: Cable Assembly Power 0.305m 22AWG 3 POS LGH RCP
• Manufacturer: TE Connectivity

Specifications of 862425-1

• Connector Type: 3POS LGH
• Cable Type: Power
• Gender: RCP
• Cable Length: 0.305 m
• Rohs Compliant: YES
• Housing Material: Silicone Rubber
• Contact Material: Bronze
• Contact Plating: Gold over Nickel
• Voltage Rating: 7.5 KV
• Insert / Contact Gender: Female
• Number Of Positions / Contacts: 3
• Product Type: Receptacle Housings
• Termination Style: Wire
• Wire Gauge Range: 22
• Wire Size (mm² [awg]): 22
• Operating Voltage (kvdc): 7.5
• Assembly Length (mm [in]): 304.80 [12.000]
• Number Of Positions: 3
• Wire Color: Blue/Yellow/Green
• Wire Insulation: Silicon Rubber
• Contact Type: Pin
• Contact Size: 22
• Contact Base Material: Bronze
• Contact Plating, Mating Area, Material: Gold (30)
• Connector Style: Receptacle
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Test Voltage: 12 KVDC at 10,000 feet and -15°C to +85°C
• Lead Free Status / Rohs Status: Details

3.6.
Rev O2
Barom etric pressure, tem perature
cycling.
Herm etic seal.
NOTE
Product Qualification and Requalification Test Sequence
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and meet requirements of additional
tests as specified in the Product Qualification and Requalification Test Sequence shown in Figure
2.
(a)
(b)
(c)
(d)
See paragraph 4.1.A.
Numbers indicate sequence in which tests are performed.
This test group is applicable to hermetic seal type receptacles only.
HiPot is performed at each temperature extreme and reduced barometric pressure,
70000 feet.
Initial exam ination of product
Contact resistance
Insulation resistance
W ithstanding voltage
Vibration
Mechanical shock
Durability
Contact engaging force
Contact separating force
Therm al shock
Hum idity, steady state
Tem perature life
Barom etric pressure, tem perature cycling
Herm etic seal
Final exam ination of product
Test or Exam ination
See Note.
Leakage rate less than 1 X 10 cc
He/sec.
See Note.
Figure 1 (end)
Requirem ent
Figure 2
-8
3,11,15
Test Sequence (b)
13(d)
1,19
5,17
6,18
Test Group (a)
4,8
10
14
12
16
19
1
2
9
7
MIL-STD 202, Method 105C,
Condition C.
MIL-STD 202, Method 112C,
Condition C.
4,13,17
2,12,16
1,18
2(c)
5,9
10
11
15
14
18
3
8
6
7
Procedure
108-36033
4 of 6