PCF8563PN NXP Semiconductors, PCF8563PN Datasheet - Page 13

• Manufacturer Part Number: PCF8563PN
• Description: Real Time Clock ULTRA LOW POWER CLOCK CALENDAR
• Manufacturer: NXP Semiconductors

Specifications of PCF8563PN

• Function: Clock, Calendar, Alarm, Timer Interrupt
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 1.8 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: Through Hole
• Rtc Bus Interface: Serial
• Package / Case: PDIP-8
• Time Format: HH:MM:SS
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: PCF8563P/F4,112

NXP Semiconductors
PCF8563
Product data sheet
As a consequence of this method, it is very important to make a read or write access in
one go, that is, setting or reading seconds through to years should be made in one single
access. Failing to comply with this method could result in the time becoming corrupted.
As an example, if the time (seconds through to hours) is set in one access and then in a
second access the date is set, it is possible that the time may increment between the two
accesses. A similar problem exists when reading. A roll over may occur between reads
thus giving the minutes from one moment and the hours from the next.
Recommended method for reading the time:
10. Read Century_months.
11. Read Years.
12. Send a STOP condition.
1. Send a START condition and the slave address for write (A2h).
2. Set the address pointer to 2 (VL_seconds) by sending 02h.
3. Send a RESTART condition or STOP followed by START.
4. Send the slave address for read (A3h).
5. Read VL_seconds.
6. Read Minutes.
7. Read Hours.
8. Read Days.
9. Read Weekdays.
Fig 9.
Access time for read/write operations
START
All information provided in this document is subject to legal disclaimers.
Rev. 8 — 18 November 2010
SLAVE ADDRESS
DATA
DATA
t < 1 s
Real-time clock/calendar
STOP
PCF8563
© NXP B.V. 2010. All rights reserved.
013aaa215
13 of 45