87782-2001 Molex Inc, 87782-2001 Datasheet - Page 3

• Manufacturer Part Number: 87782-2001
• Description: CONN SOCKET MINIDIMM VERT SMD
• Manufacturer: Molex Inc
• Series: 87782r

Specifications of 87782-2001

• Connector Style: MiniDIMM
• Number Of Positions: 244
• Memory Type: DDR 2 SDRAM
• Standards: MO-244
• Mounting Type: Surface Mount
• Features: Board Guide, Latches
• Contact Finish: Gold
• Contact Finish Thickness: 30µin (0.76µm)
• Connector Type: DIMM Socket
• No. Of Contacts: 244
• Pitch Spacing: 0.6mm
• Contact Material: Copper
• Contact Plating: Gold
• Contact Termination: Surface Mount Vertical
• Current Rating: 0.5A
• Pitch: 0.6 mm
• Number Of Positions / Contacts: 244
• Mounting Style: SMD/SMT
• Mounting Angle: Vertical
• Housing Material: Thermoplastic, High Temperature
• Voltage Rating: 30 V
• Body Material: LCP
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Mounting Feature: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 087782-2001; 087782-2001-E; 0877822001; 0877822001-E; 87782-2001-E; 877822001; 877822001-E; WM23938

REVISION: ECR/ECN INFORMATION:
DOCUMENT NUMBER:
B1
5.2 MECHANICAL REQUIREMENTS
ITEM
5.2.1
5.2.2
5.2.3
5.2.4
5.2.5
5.2.6
5.2.7
5.2.8
PS-87782-027
EC No:
DATE:
Latch Overstress
Module Insertion
Retention Force
Latch Actuation
Module Rip Out
DESCRIPTION
(Mechanical)
(w/ Latches)
Durability
Vibration
Terminal
Shock
Force
Force
Force
Force
S2008-0204
2007/09/12
PRODUCT SPECIFICATION
200Ckt. EIA 364-28
Apply a pulling force on module card at a rate
of 25±6 mm/min (1±¼ in/min) with
recommended test module as per 2.4 inserted
into connector with latches closed.
Mate and unmated 25 times at a maximum rate
of 10 cycles per minute.
Reseating to be done for 3 cycles.
Mate connector with PCB module per EIA364-
13
Amplitude : 1.52mm peak to peak
Sweep : 10-55-10 Hz in one min.
Duration : 2 hrs each on XYZ axis
Module weight : 15g for 244Ckt and 13g for
TEST CONDITION
Mated, 30G, 11ms duration, half-sine
waveform, 3 shocks in each perpendicular
axis (18 total)
Module weight – 15g for 244Ckt and 13g for
200Ckt.
Apply an actuation force on each latch at a
rate of 25 ± 6 mm/ min (1 ± ¼ in/min) with
recommended test module as per 2.4inserted
into connector.
Apply a force on each latch in the fully open
position at a rate of 25 ± 6 mm / min (1 ± ¼
in/min) and hold for 10 seconds
Axial pull out force on the terminal in the
housing at a rate of 25 ± 6mm (1± ¼ inch) per
minute.
TITLE:
CREATED / REVISED BY:
ATSEE 2007/09/12
VERTICAL MINI DIMM CONNECTOR
200/244 CKT, 0.60MM PITCH
SKANG 2007/09/20
CHECKED BY:
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC
No change in LLCR greater
than 10mΩ from initial.
Discontinuity : No greater
than 1.0 micro sec.
No change in LLCR greater
than 10mΩ from initial.
Discontinuity : No greater
than 1.0 micro sec.
No change in LLCR greater
than 10 mΩ from initial.
Total insertion force not to
exceed :
195.0 N (43.73lbs) for 200
ckt
238.0 N (53.37lbs) for 244
ckt
35.0 N (7.85lb) min. with no
damage
35N (7.85lb) max. per latch.
35 N (7.85lb) min with no
damage.
3N minimum
REQUIREMENT
MLONG 2007/09/20
APPROVED BY:
SHEET No.
3
of
6