PC28F00AP33TFA NUMONYX, PC28F00AP33TFA Datasheet - Page 41

• Manufacturer Part Number: PC28F00AP33TFA
• Description: IC FLASH 1GBIT P33 65NM 64EZBGA
• Manufacturer: NUMONYX
• Series: Axcell™r

Specifications of PC28F00AP33TFA

• Format - Memory: FLASH
• Memory Type: FLASH
• Memory Size: 1G (64M x 16)
• Speed: 95ns
• Interface: Parallel
• Voltage - Supply: 2.3 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 904253; 904253; PC28F00AP33TF 904253

P33-65nm
11.2.9
11.3
Datasheet
43
Burst Length (RCR[2:0])
The Burst Length bits (BL[2:0]) select the linear burst length for all synchronous burst
reads of the flash memory array. The burst lengths are 4-word, 8-word, 16-word or
continuous word.
Continuous burst accesses are linear only, and do not wrap within any word length
boundaries (see
cycle begins, the device outputs synchronous burst data until it reaches the end of the
“burstable” address space.
One-Time Programmable (OTP) Registers
The device contains 17 OTP Registers that can be used to implement system security
measures and/or device identification. Each OTP Register can be individually locked.
The first 128-bit OTP Register is comprised of two 64-bit (8-word) segments. The lower
64-bit segment is pre-programmed at the Numonyx factory with a unique 64-bit
number. The upper 64-bit segment, as well as the other sixteen 128-bit OTP Registers,
are blank. Users can program these registers as needed. Once programmed, users can
then lock the OTP Register(s) to prevent additional bit programming (see
“OTP Register Map” on page
Each OTP Register has an associated Lock Register bit. When a Lock Register bit is
programmed, the associated OTP Register can only be read; it can no longer be
programmed. Each OTP Register can be accessed multiple times to program individual
bits, as long as the register remains unlocked. Additionally, because the Lock Register
bits themselves are OTP, when programmed, Lock Register bits cannot be erased.
Therefore, when a OTP Register is locked, it cannot be unlocked.
Table 17, “Burst Sequence Word Ordering” on page
44).
Order Number:208043-05
42). When a burst
Figure 13,
Apr 2010