D2SW-3DS Omron, D2SW-3DS Datasheet - Page 2

• Manufacturer Part Number: D2SW-3DS
• Description: SWITCH 3A BASIC SEALED PC MNT
• Manufacturer: Omron
• Series: D2SWr

Specifications of D2SW-3DS

• Circuit: SPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 3A @ 125VAC
• Actuator Type: Round (Pin Plunger)
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Operating Force: 180gf
• Microswitch Type: Miniature
• Actuator Style: Pin Plunger
• Operating Force Max: 180gf
• Contact Voltage Ac Nom: 250V
• Contact Voltage Dc Nom: 30V
• Contact Current Max: 3A
• Contact Form: SPDT
• Contact Rating: 3 Amps at 125 Volts, 3 Amps at 30 Volts
• Actuator: Plunger, Pin
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: D2SW-3D; D2SW3DS; SW291

Specifications
■ Characteristics
Note: 1. Data shown are of initial value.
■ Ratings
D2SW-3
D2SW-01
Note: 1. The resistive load ratings apply under the following test conditions:
196
Operating speed
Operating frequency
Insulation resistance
Contact resistance
Dielectric strength (See note 2)
Vibration resistance (See note 3)
Shock resistance (See note 3)
Ambient operating temperature
Ambient operating humidity
Degree of protection
Degree of protection against electric shock
Proof tracking index (PTI)
Life expectancy
Weight
125 VAC
250 VAC
30 VDC
125 VAC
30 VDC
2. The dielectric strength shown is measured using a separator between the switch and metal mounting plate
3. For pin plunger models, the above values apply for use at the free position, operating position, and total travel position. For models with
2. The above current ratings are the values of the steady-state current.
3. Inductive load has a power factor of 0.7 min. (AC) and a time constant of 7 ms max. (DC).
4. Lamp load has an inrush current of 10 times the steady-state current.
5. Motor load has an inrush current of 6 times the steady-state current.
Rated Voltage
Rated Voltage
levers, the values apply at the total travel position.
Ambient Temperature = 20±2°C, Ambient Humidity = 65±5%, Operating frequency = 30 operations/min.
Sealed Snap Action Switch
(reference values)
Item
Mechanical
Electrical
(30 operations per minute)
Terminal model
Lead wire model
3 A
2 A
3 A
0.1 A
0.1 A
NC
NC
Resistive load
Resistive load
Non-inductive load (A)
Non-inductive load
D2SW
NO
NO
0.1 mm to 1 m/second (at pin plunger)
Mechanical: 300 operations/minute max.
Electrical: 30 operations/minute max.
100 MΩ min. (at 500 VDC)
30 mΩ max. for terminal models
50 mΩ max. for lead wire models
1,000 VAC, 50/60 Hz for 1 min. between
terminals of the same polarity
1,500 VAC, 50/60 Hz for 1 min. between current-carrying metal parts and ground, and
between each terminal and noncurrent-carrying metal parts
Malfunction: 10 to 55 Hz, 1.5 mm double amplitude
Destruction: 1,000 m/s
Malfunction: 300 m/s
-40° to 85°C (at 60% RH) with no icing
95% max. (for 5°C to 35°C)
IEC IP67 (excluding the terminals on terminal models)
Class I
175
5,000,000 operations min. at 60 operations per minute
200,000 operations min. (3 A at 125 VAC)
100,000 operations min. (2 A at 250 VAC)
Approx. 2 g
Approx. 10 g
1 A
0.5 A
1 A
—
—
NC
NC
Lamp load
Lamp load
D2SW-3
0.5 A
0.3 A
2
(approx. 30G) max.
NO
NO
2
(approx. 100G) max.
1 A
0.5 A
1 A
—
—
NC
NC
Inductive load
Inductive load
50 mΩ max. for terminal models
70 mΩ max. for lead wire models
600 VAC, 50/60 Hz for 1 min. between ter-
minals of the same polarity
200,000 operations min.
(at rated resistive load)
0.5 A
0.3 A
NO
NO
Inductive load
Inductive load
1 A
0.5 A
1 A
—
—
D2SW-01
NC
NC
Motor load
Motor load
0.5 A
0.3 A
NO
NO