RI-27A Coto Technology, RI-27A Datasheet

SWITCH MAGNETIC .5A 20-34AT

RI-27A

Manufacturer Part Number
RI-27A
Description
SWITCH MAGNETIC .5A 20-34AT
Manufacturer
Coto Technology
Series
RI-27r
Type
Glass Bodyr
Datasheet

Specifications of RI-27A

Circuit
SPST-NO
Must Operate
20 ~ 34AT
Must Release
7 ~ 19.5AT
Switching Current (dc) (max)
500mA
Switching Voltage (dc) (max)
200V
Switching Power (max)
10W
Magnet
Not Specified
Mounting Type
Non-Standard (Axial)
Termination Style
Axial (2 Leads)
Switch Type
Dry-Reed
Contact Form
SPST - NO
Contact Rating
500 mAmps
Magnet Type
Electromagnet
Operate Range
20 At to 34 At
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
306-1082
RI27A
104
General data for all models RI-27
AT-Customization / Preformed Leads
Besides the standard models, customized products can
also be supplied offering the following options:
! Operate and release ranges to customer specification
! Cropped and/or preformed leads
Coils
All characteristics are measured using the Philips
Standard Coil. For definitions of the Philips Standard
Coil, refer to the Reed Switch Technical & Application
Information Section of this catalog.
Life expectancy and reliability
The life expectancy data given below are valid for a coil
energized at 1.25 times the published maximum operate
value for each type in the RI-27 series.
No-load conditions (operating frequency: 100 Hz)
Life expectancy: min. 10
of less than 2x10
End of life criteria:
Loaded conditions (resistive load: 5 V; 100 mA;
operating frequency: 125 Hz)
Contact resistance > 1Ω after 2 ms
Release time > 2ms (latching or contact sticking).
RI-27 Series Dry Reed Switch
COTO TECHNOLOGY (USA) Tel: (401) 943-2686 / Fax (401) 942-0920
-10
with a confidence level of 90%.
9
operations with a failure rate
RI-27 Series
Pico dry-reed switch hermetically sealed in a gas-filled glass envelope.
Single-pole, single-throw (SPST) type, having normally open con-
tacts, and containing two magnetically actuated reeds.
The switch is of the double-ended type and may be actuated by an
electromagnet, a permanent magnet or a combination of both.
The device is intended for use in relays, sensors, pulse counters or
similar devices.
RI-27 Series Features
Superior glass-to-metal seal and blade alignment
Excellent life expectancy and reliability
Ideal for ATE switching
Contact layers: gold, sputtered ruthenium
RI-27AAA
Life expectancy: min. 2 x 10
rate of less than 10
End of life criteria:
RI-27AA; RI-27A
Life expectancy: min. 5x10
rate of less than 0.5x10
90%.
End of life criteria:
Loaded conditions (resistive load: 12 V; 4 mA; (15
mA peak); operating frequency: 170 Hz)
RI-27AAA Not applicable.
RI-27AA; RI-27A
Life expectancy: min. 45 x 10
50 x 10
Contact resistance > 1Ω after 2.5 ms
Release time > 1 ms (latching or contact sticking).
Release time >1 ms (latching or contact sticking).
Contact resistance >1Ω after 2.5 ms
6
6
operations).
(Europe) Tel: +31-45-5439343 / Fax +31-45-5427216
Dimensions in inches (mm)
-8
with a confidence level of 90%.
-8
with a confidence level of
7
7
operations with a failure
operations with a failure
6
operations (tested up to

Related parts for RI-27A

RI-27A Summary of contents

Page 1

... End of life criteria: Contact resistance >1Ω after 2.5 ms Release time >1 ms (latching or contact sticking). Loaded conditions (resistive load mA; (15 mA peak); operating frequency: 170 Hz) RI-27AAA Not applicable. RI-27AA; RI-27A Life expectancy: min operations). 6 (Europe) Tel: +31-45-5439343 / Fax +31-45-5427216 ...

Page 2

... Contact arrangement is normally open; lead finish is tinned; net mass is approximately 100 mg; and can be mounted in any position. Shock RI-27AA; RI-27A The switches are tested in accordance with “IEC 68-2- 27”, test Ea (peak acceleration 150 G, half sinewave; duration 11 ms). Such a shock will not cause an open switch (no magnetic field present) to close, nor a switch kept closed coil to open ...

Related keywords