101-1284 Rabbit Semiconductor, 101-1284 Datasheet - Page 76

DEV KIT STANDARD MINI RCM5600W

101-1284

Manufacturer Part Number
101-1284
Description
DEV KIT STANDARD MINI RCM5600W
Manufacturer
Rabbit Semiconductor
Series
MiniCore™r
Type
Transceiver, 802.11 b/gr
Datasheet

Specifications of 101-1284

Frequency
2.4GHz
Wireless Frequency
2.4 GHz
Interface Type
USB
Operating Voltage
3.3 V
Output Power
19 dBm
Antenna
U.FL Connector
Operating Temperature Range
- 30 C to + 55 C
Silicon Manufacturer
Rabbit Semiconductor
Silicon Family Name
RabbitCore
Kit Contents
Board
Features
On-board Single-Chip 802.11b/g Transceiver, Built-In Web Server
Development Tool Type
Hardware /
Rohs Compliant
Yes
For Use With/related Products
RCM5600W
Lead Free Status / RoHS Status
Not applicable / Not applicable
Other names
316-1160
• Your Own Channel—
• Region/Country—
• Disable/enable encryption—
• There are four encryption keys (
70
The default is shown below.
The default
parameter is mandatory when creating an ad-hoc network. While it is optional for the
infrastructure mode, it is usually best left at the default
Note that there are restrictions on which channels may be used in certain countries.
These are provided in Table 5 for some countries.
limit to match the region selected. Table 5 lists the regions that are supported and their
corresponding macros.
The region selected must match the region where the RCM5600W MiniCore module
will be used.
The default is shown below.
tion is enabled.
The default (encryption disabled) is shown below.
The following encryption options are available.
macro (default
well. The default is for the keys to remain undefined.
#define IFC_WIFI_CHANNEL 0
#define
#define IFC_WIFI_ENCRYPTION IFPARAM_WIFI_ENCR_NONE
IFPARAM_WIFI_ENCR_NONE — no encryption is used.
IFPARAM_WIFI_ENCR_ANY — any type of encryption is used.
IFPARAM_WIFI_ENCR_WEP — use WEP encryption. You will need to define at least
one WEP key (see below).
IFPARAM_WIFI_ENCR_TKIP — use TKIP or WPA encryption. You will need to
define a passphrase or a key for TKIP encryption, as well as define the WIFI_USE_WPA
macro (see below).
IFPARAM_WIFI_ENCR_CCMP — use CCMP or WPA2 encryption. You will need to
define at least one WEP key (see below).
IFC_WIFI_WEP_KEY0_BIN
IFC_WIFI_WEP_KEY1_BIN
IFC_WIFI_WEP_KEY2_BIN
IFC_WIFI_WEP_KEY3_BIN
0
IFC_
means that any valid channel may be used by the requested SSID. This
0
). One or more of the following additional macros must be defined as
IFC_WIFI_REGION
WIFI_REGION IFPARAM_WIFI_REGION_AMERICAS
IFC_WIFI_CHANNEL
IFC_WIFI_ENCRYPTION
0
,
1
,
2
,
3
sets the channel range and maximum power
) associated with the
determines the channel on which to operate.
IFC_WIFI_WEP_KEY0_HEXSTR
IFC_WIFI_WEP_KEY1_HEXSTR
IFC_WIFI_WEP_KEY2_HEXSTR
IFC_WIFI_WEP_KEY3_HEXSTR
indicates whether or not encryp-
0
.
IFC_WIFI_WEP_KEYNUM
MiniCore RCM5600W

Related parts for 101-1284