101-1284 Rabbit Semiconductor, 101-1284 Datasheet - Page 72

• Manufacturer Part Number: 101-1284
• Description: DEV KIT STANDARD MINI RCM5600W
• Manufacturer: Rabbit Semiconductor
• Series: MiniCore™r
• Type: Transceiver, 802.11 b/gr

Specifications of 101-1284

• Frequency: 2.4GHz
• Wireless Frequency: 2.4 GHz
• Interface Type: USB
• Operating Voltage: 3.3 V
• Output Power: 19 dBm
• Antenna: U.FL Connector
• Operating Temperature Range: - 30 C to + 55 C
• Silicon Manufacturer: Rabbit Semiconductor
• Silicon Family Name: RabbitCore
• Kit Contents: Board
• Features: On-board Single-Chip 802.11b/g Transceiver, Built-In Web Server
• Development Tool Type: Hardware /
• Rohs Compliant: Yes
• For Use With/related Products: RCM5600W
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 316-1160

•
•
•
66
BROWSELED.C
Four “device LEDs” are created along with four buttons to toggle them. Users can use
their Web browser to change the status of the lights. The DS1, DS2, DS3, and DS4
LEDs on the Digital I/O accessory board will match those on the Web page. As long as
you have not modified the
lowing server address in your Web browser to bring up the Web page served by the
sample program. Remember to configure the access point to match the default settings
of the
Otherwise use the TCP/IP settings you entered in the
Options > Project Options menu
Once you compile and run this sample program, you can use the buttons in the Web
browser to toggle the LEDs on the Digital I/O accessory board on/off.
PINGLED.C
LED DS2 on the Digital I/O accessory board when a ping is sent and it will flash LED
DS3 when a ping is received.
Before you compile and run this sample program, change
SSID
the amount of time in milliseconds between the outgoing pings.
Uncomment the
PINGLED_STATS.C
receiver/transmitter statistics in the Dynamic C
Before you compile and run this sample program, change
SSID
the amount of time in milliseconds between the outgoing pings.
Modify the value in the
ing of the statistics. Also review the
which affect the number of samples to gather and create a bar graph display instead of a
numeric display.
Uncomment the
Once you compile and run this sample program, LED DS2 on the Digital I/O accessory
board will flash when a ping is sent, and LED DS3 will flash when a ping is received.
http://10.10.6.100.
to the host and SSID you want to ping. You may modify
to the host and SSID you want to ping. You may modify
TCPCONFIG 1
—This program demonstrates ICMP by pinging a remote host. It will flash
—This program demonstrates a basic controller running a Web page.
VERBOSE
VERBOSE
—This program is similar to
macro.
MOVING_AVERAGE
TCPCONFIG 1
define to see the incoming ping replies.
define to see the incoming ping replies.
.
GATHER_INTERVAL
macro in the sample program, enter the fol-
macro to change the moving average filter-
STDIO
PINGLED.C
in the “Defines” tab in the Dynamic C
window.
and
PING_WHO
PING_WHO
GRAPHICAL
, but it also displays
PING_DELAY
PING_DELAY
MiniCore RCM5600W
and
and
IFC_WIFI_
IFC_WIFI_
macros,
to change
to change