LM9076S-5.0/NOPB National Semiconductor, LM9076S-5.0/NOPB Datasheet - Page 12

• Manufacturer Part Number: LM9076S-5.0/NOPB
• Description: IC REGULATOR LDO 5V 150MA TO-263
• Manufacturer: National Semiconductor
• Type: Voltage Regulatorr

Specifications of LM9076S-5.0/NOPB

• Regulator Topology: Positive Fixed
• Voltage - Output: 5V
• Voltage - Input: 5.35 ~ 40 V
• Voltage - Dropout (typical): 0.15V @ 150mA
• Number Of Regulators: 1
• Current - Output: 150mA
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: TO-263-5, D²Pak (5 leads + Tab), TO-263BA
• Current, Output: 150 mA
• Package Type: TO-263
• Regulation, Line: 17 mV
• Regulation, Load: 42 mV
• Regulator Type: Low Dropout
• Resistance, Thermal, Junction To Case: 2.9 °C/W
• Temperature, Operating, Range: -40 to +125 °C
• Voltage, Dropout: 150 mV
• Voltage, Input: 5.35 to 40 V
• Voltage, Output: 5 V
• Voltage, Supply, Rejection Ratio: 60 dB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Limit (min): -
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device
• Other names: *LM9076S-5.0; *LM9076S-5.0/NOPB; LM9076S-5.0

www.national.com
For the LM9076–3.3 with a C
I
For the LM9076–5.0 with a C
I
THERMAL PROTECTION
Device operational range is limited by the maximum junction
temperature (T
the ambient temperature (T
DELAY
DELAY
value of 0.420 uA the typical RESET delay time is:
value of 0.420 uA the typical RESET delay time is:
t
t
DELAY
DELAY
= 5.0V X (0.001uF / 0.420uA) = 11.9 ms
t
=3.3V × (0.001 uF / 0.420 uA) = 7.8 ms
DELAY
J
). The junction temperature is influenced by
= V
OUT
X (C
A
), package selection, input volt-
DELAY
DELAY
DELAY
value of 0.001 uF and a
value of 0.001 uF and a
FIGURE 2. Typical Reset Pin Operational Waveforms
/ I
DELAY
)
12
age (V
maximum load currents the input voltage and/or ambient tem-
perature will be limited. When operating with maximum input
voltage the load current and/or the ambient temperature will
be limited.
Even though the LM9076 is equipped with circuitry to protect
itself from excessive thermal dissipation, it is not recommend-
ed that the LM9076 be operated at, or near, the maximum
recommended die junction temperature (T
pair long term device reliability.
The thermal protection circuity monitors the temperature at
the die level. When the die temperature exceeds typically
160°C the voltage regulator output will be switched off.
IN
), and the output load current. When operating with
J
) as this may im-
20083049