MC68HC705SR3CP Freescale Semiconductor, MC68HC705SR3CP Datasheet - Page 33

• Manufacturer Part Number: MC68HC705SR3CP
• Description: IC MCU 3.75K 2.1MHZ OTP 40-DIP
• Manufacturer: Freescale Semiconductor
• Series: HC05r

Specifications of MC68HC705SR3CP

• Core Processor: HC05
• Core Size: 8-Bit
• Speed: 4MHz
• Peripherals: LED, POR
• Number Of I /o: 32
• Program Memory Size: 3.75KB (3.75K x 8)
• Program Memory Type: OTP
• Ram Size: 192 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 40-DIP (0.600", 15.24mm)
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Connectivity: -

The MC68HC05SR3/MC68HC705SR3 has 8K-bytes of addressable memory, consisting of I/O
registers, user ROM/EPROM, user RAM, and self-check/bootstrap ROM. Figure 4-1 shows the
memory map for MC68HC05SR3/MC68HC705SR3 device.
4.1
The I/O, status and control registers are located within the first 16 bytes of memory, from $0000
to $000F. These are shown in the memory map in Figure 4-1; and a summary of the register
outline is shown in Table 4-1. Reading from unimplemented bits will return unknown states, and
writing to unimplemented bits will be ignored.
4.2
The user RAM (including the stack) consists of 192 bytes. It is separated into two blocks at
locations $0010 to $008F, and $00C0 to $00FF. The stack begins at address $00FF and proceeds
down to $00C0.
4.3
The user ROM consists of 3840 bytes of memory, from $1000 to $1EFF. Twelve bytes of user
vectors are also available, from $1FF4 to $1FFF. On the MC68HC705SR3, this ROM is replaced
by EPROM.
Note:
MC68HC05SR3
Using the stack area for data storage or temporary work locations requires care to
prevent the data from being overwritten due to stacking from an interrupt or subroutine
call.
I/O Registers
RAM
ROM
MEMORY AND REGISTERS
MEMORY AND REGISTERS
4
Freescale
TPG
4-1
4