PIC16C67-04/PQ Microchip Technology, PIC16C67-04/PQ Datasheet - Page 68

• Manufacturer Part Number: PIC16C67-04/PQ
• Description: IC MCU OTP 8KX14 PWM 44-MQFP
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16C67-04/PQ

• Core Size: 8-Bit
• Program Memory Size: 14KB (8K x 14)
• Core Processor: PIC
• Speed: 4MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 33
• Program Memory Type: OTP
• Ram Size: 368 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 6 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 44-MQFP, 44-PQFP
• Controller Family/series: PIC16C
• No. Of I/o's: 33
• Ram Memory Size: 368Byte
• Cpu Speed: 4MHz
• No. Of Timers: 3
• No. Of Pwm Channels: 2
• Embedded Interface Type: I2C, SPI
• Rohs Compliant: Yes
• Processor Series: PIC16C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 368 B
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 33
• Number Of Timers: 3 bit
• Operating Supply Voltage: 2.5 V to 6 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000, DM163022
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 309-1002 - ADAPTER 44-PQFP TO 40-DIP
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details

PIC16C6X
7.3
An 8-bit counter is available as a prescaler for the
Timer0 module or as a postscaler for the Watchdog
Timer (WDT), respectively (Figure 7-6). For simplicity,
this counter is being referred to as “prescaler” through-
out this data sheet. Note that the prescaler may be
used by either the Timer0 module or the Watchdog
Timer, but not both. Thus, a prescaler assignment for
the Timer0 module means that there is no prescaler for
the Watchdog Timer, and vice-versa.
FIGURE 7-6:
DS30234D-page 68
Applicable Devices
61 62 62A R62 63 R63 64 64A R64 65 65A R65 66 67
RA4/T0CKI
CLKOUT (=Fosc/4)
WDT Enable bit
pin
Watchdog
Timer
Prescaler
Note: T0CS, T0SE, PSA, PS2:PS0 are (OPTION<5:0>).
BLOCK DIAGRAM OF THE TIMER0/WDT PRESCALER
T0SE
0
1
PSA
M
U
X
0
1
T0CS
M
U
X
0
8-bit Prescaler
8 - to - 1MUX
Time-out
8
M U X
WDT
1
0
1
PSA
M
U
X
The PSA and PS2:PS0 bits (OPTION<3:0>) determine
the prescaler assignment and prescale ratio.
When assigned to the Timer0 module, all instructions
writing to the TMR0 register (e.g. CLRF
MOVWF TMR0, BSF TMR0,bitx) will clear the pres-
caler count. When assigned to the Watchdog Timer, a
CLRWDT instruction will clear the Watchdog Timer and
the prescaler count. The prescaler is not readable or
writable.
Note:
PSA
PS2:PS0
Cycles
SYNC
Writing to TMR0 when the prescaler is
assigned to Timer0 will clear the prescaler
count, but will not change the prescaler
assignment.
2
1997 Microchip Technology Inc.
TMR0 reg
Data Bus
8
Set flag bit T0IF
on Overflow
TMR0,