PIC18F25J11-I/ML Microchip Technology, PIC18F25J11-I/ML Datasheet - Page 9

• Manufacturer Part Number: PIC18F25J11-I/ML
• Description: IC PIC MCU FLASH 32K 2V 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F25J11-I/ML

• Core Size: 8-Bit
• Program Memory Size: 32KB (16K x 16)
• Core Processor: PIC
• Speed: 48MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Controller Family/series: PIC18
• No. Of I/o's: 16
• Ram Memory Size: 3.6875KB
• Cpu Speed: 48MHz
• No. Of Timers: 5
• Interface: EUSART, I2C, SPI
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3776 B
• Interface Type: EUSART, I2C, SPI
• Maximum Clock Frequency: 48 MHz
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM183022, DM183032, DV164136, MA180023
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 10 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164322 - MODULE SOCKET MPLAB PM3 28/44QFN
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

2. Module: 28-Pin QFN Pinout Diagram
3. Module: RC4 and RC5 Input/Output Pins
4. Module: Chapter 18, MSSP Pins
28.3
 2010 Microchip Technology Inc.
DC CHARACTERISTICS
D031A V
D031B
D041A V
D041B
Param
No.
The RP0 and RP1 pins are swapped in the 28-pin
diagram, for the QFN package.
• RP0 should be listed on pin 27 (RA0)
• RP1 should be listed on pin 28 (RA1)
Section 9.4 “PORTC, TRIS and LATC Regis-
ters” of the data sheet incorrectly states that the
RC4 and RC5 pins can only be used as inputs.
These pins can be used for either input or output
functionality for all devices in the PIC18F46J11
family.
Section 18.3 “SPI Mode” erroneously states
that the RC7, RB5 and RB4 pins are used for
MSSP functions. The correct pins for MSSP SPI
functions are:
• Serial Data Out (SDOx) – RC5/SDO1/RP16
• Serial Data In (SDIx) – RC4/SDI1/SDA1/
• Serial Clock (SCKx) – RC3/SCK1/SCL1/
or SDO2/Remappable
RP15 or SDI2/Remappable
RP14 or SCK2/Remappable
DC Characteristics:
Symbol
IL
IH
Mislabeled
SDAx/SCLx
SDAx/SCLx
Characteristic
PIC18F46J11 Family (Industrial)
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C T
0.7 V
Min
2.1
—
—
DD
PIC18F46J11 FAMILY
5. Module: Watchdog Timer, Features
6. Module: Section 4.4 “Brown-out Reset”
7. Module: DC Characteristics
Section 18.5 “I
that the RB5 and RB4 pins are used for MSSP
functions. The correct pins for the MSSP I
functions are:
• Serial Clock (SCLx) – RC3/SCK1/SCL1/RP14
• Serial Data (SDAx) – RC4/SDI1/SDA1/RP15
The data sheet’s features summary on page 1
incorrectly states that the Watchdog Timer cur-
rent is 2.2 A at 2V. The correct value is 813 nA
at 2V (typical).
Section 4.4 “Brown-out Reset (BOR)” states
that the V
consumes 200 nA typical during normal opera-
tion above ~2.3V. The corrected current
consumption is 40 nA typical.
In the data sheet, Section 28.3 “DC Character-
istics: PIC18F46J11 Family (Industrial)”,
input thresholds for the I
not documented. See the partial table below for
the missing values:
or RD0/PMD0/SCL2
or RD1/PMD1/SDA2
0.3 V
Max
0.8
—
—
DD
Summary
DD
Units
V
V
V
V
2
A
C Mode” erroneously states
monitoring BOR (DSBOR)
 +85°C for industrial
I
SMBus enabled
I
SMBus enabled, V
2
2
C™ enabled
C™ enabled
2
C™/SMBus pins were
Conditions
DS80435H-page 9
DD
 3V
2
C