S102K33Y5PP63K5R Vishay, S102K33Y5PP63K5R Datasheet - Page 18

• Manufacturer Part Number: S102K33Y5PP63K5R
• Description: CAP CER 1000PF 2000V Y5P DISC
• Manufacturer: Vishay
• Series: Sr

Specifications of S102K33Y5PP63K5R

• Capacitance: 1000pF
• Voltage - Rated: 2000V (2kV)
• Tolerance: ±10%
• Temperature Coefficient: Y5P (B)
• Mounting Type: Through Hole
• Operating Temperature: -30°C ~ 85°C
• Features: High Voltage
• Applications: General Purpose
• Package / Case: Radial - Disc
• Size / Dimension: 0.335" Dia (8.5mm)
• Thickness: 4.00mm Max
• Lead Spacing: 0.197" (5.00mm)
• Lead Style: Kinked
• Voltage Rating: 2 KVolts
• Operating Temperature Range: - 30 C to + 85 C
• Termination Style: Radial
• Product: Ceramic Disc Capacitors - Other Various
• Dimensions: 8.5 mm Dia.
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Ratings: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 1252PH

CAUTION
1. OPERATING VOLTAGE AND FREQUENCY CHARACTERISTIC
When sinusiodal or ripple voltage applied to DC Ceramic Disc Capacitors, be sure to maintain the peak-to-peak value or the
peak value of the sum of both AC + DC within the rated voltage.
When start or stop applying the voltage, resonance may generate irregular voltage.
When rectangular or Pulse Wave Voltage is applied to DC Ceramic Disc Capacitors, the self-heating generated by the capacitor
is higher than the sinusoidal application with the same frequency. The allowable voltage rating for the rectangular or pulse wave
corresponds approximately with the allowable voltage of a sinusoidal wave with the double fundamental frequency.
The allowable voltage varies, depending on the voltage and the waveform.
Diagrams of the limiting values are available for each capacitor series on request.
2. OPERATING TEMPERATURE AND SELF-GENERATED HEAT
The surface temperature of the capacitors must not exceed the upper limit of its Rated Operating Temperature
During operation in a high-frequency circuit or a pulse signal circuit, the capacitor itself generate heat due to dielectric losses.
Applied voltage should be the load such as self-generated heat is within 20 °C on the condition of environmental temperature
25 °C.
Note, that excessive heat may lead to deterioration of the capacitor’s characteristics
Document Number: 28536
Revision: 07-Jan-10
VOLTAGE
Waveform
Figure
Ceramic Disc, RFI and Safety Capacitors
V
0-p
0
For technical questions, contact:
DC
V
0-p
[e-mail]
0
DC + AC
General Information
Vishay BCcomponents
V
p-p
0
AC
www.vishay.com
19