CLLE1AX7R1A154M TDK Corporation, CLLE1AX7R1A154M Datasheet - Page 6

• Manufacturer Part Number: CLLE1AX7R1A154M
• Description: CAP LOW ESL .15UF 10V X7R 0805
• Manufacturer: TDK Corporation
• Series: CLLr

Specifications of CLLE1AX7R1A154M

• Capacitance: 0.15µF
• Voltage - Rated: 10V
• Tolerance: ±20%
• Temperature Coefficient: X7R
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 125°C
• Features: Low ESL, Multi-Terminal
• Applications: General Purpose
• Package / Case: 0805 (2012 Metric)
• Size / Dimension: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Thickness: 0.55mm Max
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Ratings: -
• Lead Spacing: -
• Other names: 445-3396-2

• All specifications are subject to change without notice. Please read the precautions before using the product.
US Catalog // CLL Series — Ultra Low Inductance Capacitors // Version A11
No.
1
2
3
4
5
6
7
8
General
Specifications
Item
External
Appearance
Insulation
Resistance
Voltage Proof
Capacitance
Dissipation
Factor
(Class 2)
Temperature
Characteristics
of Capacitance
(Class 2)
Robustness of
Terminations
Solderability
CLL Series — Ultra Low Inductance Capacitors
Performance
No defects which may affect
performance.
100MΩ•μF min.
Withstand test voltage without
insulation breakdown or other damage.
Within the specified tolerance at
1000hrs age (Per IEC-384-9).
Capacitance Change (%)
No sign of termination coming off,
breakage of ceramic, or other abnormal
signs.
All terminations shall exhibit a
continuous solder coating free from
defects for a minimum of 75% of the
surface area of any individual
termination. Anomalies other than
dewetting, non-wetting, and pin holes
are not cause for rejection. Ceramic
surface of A sections shall not be
exposed due to melting or shifting of
termination material.
T.C.
X7R
X7S
No DC Voltage Applied
D.F.
0.10 max.
X7R: ± 15%
X7S: ± 22%
A section
Test or Inspection Method
Inspect with magnifying glass (3×).
Apply rated voltage for 60s.
Measure 8 terminal electrodes at the same time.
2.5 times rated voltage (DC) shall be applied for 1 to
5s. Charge / discharge current shall not exceed 50mA.
Measure 8 terminal electrodes at the same time.
Measure 8 terminal electrodes at the same time.
See No.4 in this table for measuring condition.
Capacitance shall be measured by the steps shown in
the following table after thermal equilibrium is obtained
for each step.
∆C be calculated ref. STEP 3 reading
Reflow solder the capacitor on P.C. board (shown in
Appendix 1 and 2) and apply a pushing force of 2N for
10±1s.
Completely soak both terminations in
solder at 235±5°C for 2±0.5s.
Solder : H63A (JIS Z 3282)
Flux : Isopropyl alcohol (JIS K 8839)
1kHz±10%
Measuring
Frequency
Step
1
2
3
4
Rosin (JIS K 5902) 25% solid solution.
Capacitor
Temperature (ºC)
Reference temp. ± 2
Min. operating temp. ± 2
Reference temp. ± 2
Max. operating temp. ± 2
Withstanding
Voltage
≤ 6.3V
10V
P.C. Board
1.0 ± 0.2 V
0.5 ± 0.2 V
2N
Measuring
voltage
rms
rms