B76010V6869M045 Kemet, B76010V6869M045 Datasheet - Page 26

• Manufacturer Part Number: B76010V6869M045
• Description: CAP TANT 68UF 10V 20% POLY SMD
• Manufacturer: Kemet
• Series: B760r
• Type: Moldedr

Specifications of B76010V6869M045

• Capacitance: 68µF
• Voltage - Rated: 10V
• Tolerance: ±20%
• Esr (equivalent Series Resistance): 45.0 mOhm
• Operating Temperature: -55°C ~ 105°C
• Mounting Type: Surface Mount
• Package / Case: 2917 (7343 Metric)
• Size / Dimension: 0.287" L x 0.169" W (7.30mm x 4.30mm)
• Height: 0.075" (1.90mm)
• Manufacturer Size Code: V
• Features: Polymer
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Spacing: -
• Other names: 495-2309-2; B76010V6869M 45K11

Low-resistance applications and voltage networks
For low-resistance applications, KEMET recommends a maximum operating voltage of half the
permissible maximum continuous voltage, so that the capacitors have sufficient tolerance to
withstand voltage peaks. Depending on the conditions of use, the early failure rate is maybe
higher here by a factor of 2 to 20 than in the range with a constant failure rate as specified in the
data book.
When operated directly in a voltage network, the capacitor should be protected against
overvoltage, e.g. by a suppressor diode, and against polarity reversal by a diode. If a capacitor is
operated in an unprotected low-impedance circuit and fails because the permissible conditions for
the forward DC voltage, reverse DC voltage, power dissipation or temperature are exceeded, the
continued current flow through the overstressed capacitor may produce overheating. The
overheated capacitor may damage the surrounding components and the circuit board.
Please read Important notes and
Cautions and warnings at the end of this document.
Polymer chip capacitors
Basic
Page 26 of 27
B760