C1632X7R1H224K TDK Corporation, C1632X7R1H224K Datasheet - Page 11

• Manufacturer Part Number: C1632X7R1H224K
• Description: CAP CER .22UF 50V 10% X7R 0612
• Manufacturer: TDK Corporation
• Series: Cr

Specifications of C1632X7R1H224K

• Capacitance: 0.22µF
• Voltage - Rated: 50V
• Tolerance: ±10%
• Temperature Coefficient: X7R
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 125°C
• Features: Low ESL
• Applications: General Purpose
• Package / Case: 1206 (3216 Metric) Wide, 0612 (1632 Metric)
• Size / Dimension: 0.063" L x 0.126" W (1.60mm x 3.20mm)
• Thickness: 1.15mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Ratings: -
• Lead Spacing: -
• Other names: 445-1814-2; C1632X7R1H224KT

• All specifications are subject to change without notice. Please read the precautions before using the product.
No.
14
15
*As for the initial measurement of capacitors on number 6, 10, 11, 12 and 13, leave capacitor at 150 -10, 0°C for 1h and
measure the value after leaving capacitor for 24 ± 2h in ambient condition.
General
Specifications
Item
Moisture Resistance
External
appearance
Capacitance
D.F. (Class 2)
Insulation
Resistance
Life
External
appearance
Capacitance
D.F. (Class 2)
Insulation
Resistance
Performance
No mechanical damage.
Characteristics
X7R: 200% of initial spec. max.
X7S: 200% of initial spec. max.
X5R: 200% of initial spec. max.
X6S: 200% of initial spec. max.
500MΩ or 25MΩ•μF min. (whichever
smaller). As for the capacitor of rated
voltage 16, 10, 6.3 and 4V DC,
5MΩ•μF min.
No mechanical damage.
Characteristics
X7R: 200% of initial spec. max.
X7S: 200% of initial spec. max.
X5R: 200% of initial spec. max.
X6S: 200% of initial spec. max.
1,000MΩ or 50MΩ•μF min.
whichever smaller. As for the capacitor
of rated voltage 16, 10, 6.3 and 4V DC,
10MΩ•μF min.
Characteristics
Class 2
Characteristics
Class 2
X7R
X7S
X5R
X6S
X7R
X7S
X5R
X6S
Change from the
value before test
± 12.5 %
Change from the
value before test
± 15 %
C Series — Low ESL Flipped Type
Test or Inspection Method
Solder the capacitors on P.C. board (shown in
Appendix 1) before testing.
Apply the rated voltage at temperature 40 ± 2ºC and
90 to 95%RH for 500 +24, 0h.
Charge/discharge current shall not exceed 50mA.
Leave the capacitor in ambient conditions for 48 ± 4h
before measurement.
Voltage conditioning:
Voltage treats the capacitor under testing temperature
and voltage for 1hour.
Leave the capacitor in ambient conditions for 24 ± 2h
before measurement.
Use this measurement for initial value.
Reflow Solder the capacitor on P.C. board (shown in
Appendix 1) before testing.
Apply rated voltage at maximum operating temperature
± 2ºC for 1,000 +48, 0h.
Charge/discharge current shall not exceed 50mA.
Leave the capacitor in ambient conditions for 24 ± 2h
before measurement.
Voltage conditioning:
Voltage treats the capacitor under testing temperature
and voltage for 1hour.
Leave the capacitor in ambient conditions for 48 ± 4h
before measurement.
Use this measurement for initial value.
US Catalog // C Series — Flipped Type // Version A11