C1608X7R1H471K TDK Corporation, C1608X7R1H471K Datasheet - Page 57

• Manufacturer Part Number: C1608X7R1H471K
• Description: CAP CER 470PF 50V X7R 10% 0603
• Manufacturer: TDK Corporation
• Series: Cr

Specifications of C1608X7R1H471K

• Capacitance: 470pF
• Package / Case: 0603 (1608 Metric)
• Voltage - Rated: 50V
• Tolerance: ±10%
• Temperature Coefficient: X7R
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 125°C
• Features: Low ESR
• Applications: General Purpose
• Size / Dimension: 0.063" L x 0.031" W (1.60mm x 0.80mm)
• Thickness: 0.80mm
• Tolerance (+ Or -): 10%
• Voltage: 50VDC
• Temp Coeff (dielectric): X7R
• Operating Temp Range: -55C to 125C
• Mounting Style: Surface Mount
• Construction: SMT Chip
• Case Style: Ceramic Chip
• Failure Rate: Not Required
• Wire Form: Not Required
• Product Length (mm): 1.6mm
• Product Depth (mm): 0.8mm
• Product Height (mm): 0.8mm
• Product Diameter (mm): Not Requiredmm
• Dielectric Characteristic: X7R
• Capacitance Tolerance: ± 10%
• Voltage Rating: 50VDC
• Capacitor Case Style: 0603
• No. Of Pins: 2
• Capacitor Mounting: SMD
• Rohs Compliant: Yes
• Dc: 1146
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Ratings: -
• Lead Spacing: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 445-1307-2; C1608X7R1H471K; C1608X7R1H471KT; C1608X7R1H471KT

• All specifications are subject to change without notice. Please read the precautions before using the product.
No.
16
General
Specifications
Item
Moisture Resistance
External
appearance
Capacitance
Q
(Class 1)
D.F.
(Class 2)
Insulation
Resistance
Performance
No mechanical damage.
* Inside ( ) is applied to Y5V 6.3V
product.
Characteristics
X5R: 200% of initial spec. max.
X7R: 200% of initial spec. max
Y5V: 150% of initial spec. max
500MΩor 25MΩ•μF min., whichever
smaller.
(As for the capacitors of rated voltage
16, 10 and 6.3V DC, 500 MΩ or
5MΩ•μF min.,)
Characteristics
Class 1
Class 2
Rated
Capacitance
C ≥ 30pF
C < 30pF
C0G
X5R
X7R
Y5V
C : Rated capacitance (pF)
Change from the
value before test
±7.5% or ±0.75pF,
whichever larger.
± 25 %
± 25 %
± 30 % *(± 40 %)
Q
200 min.
100+10/3×C min.
C Series — General Application
Test or Inspection Method
Reflow solder the capacitor on P.C. board (shown in
Appendix 1a or Appendix 1b) before testing.
Apply the rated voltage at temperature 40±2ºC and 90
to 95%RH for 500 +24,0h.
Charge/discharge current shall not exceed 50mA.
Leave the capacitor in ambient conditions for 6 to 24h
(Class 1) or 24±2h (Class 2) before measurement.
Voltage conditioning (only for Class 2):
Voltage treat the capacitor under testing temperature
and voltage for 1 hour.
Leave the capacitor in ambient conditions for 24±2h
before measurement.
Use this measurement for initial value.
US Catalog // C Series — General Application // Version A11