ESRH181M02B Cornell Dubilier Electronics (CDE), ESRH181M02B Datasheet - Page 3
ESRH181M02B
Manufacturer Part Number
ESRH181M02B
Description
CAP ALUM POLY 180UF 2V SMD
Manufacturer
Cornell Dubilier Electronics (CDE)
Series
ESRHr
Datasheet
1.ESRH101M06R.pdf
(3 pages)
Specifications of ESRH181M02B
Capacitance
180µF
Voltage Rating
2V
Tolerance
±20%
Lifetime @ Temp.
1000 Hrs @ 105°C
Operating Temperature
-55°C ~ 105°C
Features
Polymer
Ripple Current
2.5A
Esr (equivalent Series Resistance)
15.0 mOhm
Mounting Type
Surface Mount
Package / Case
2917 (7343 Metric)
Size / Dimension
0.287" L x 0.169" W (7.30mm x 4.30mm)
Height
0.110" (2.80mm)
Surface Mount Land Size
0.287" L x 0.169" W (7.30mm x 4.30mm)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Spacing
-
Specifications (continued)
Life Test:
Apply rated DC working voltage at 105 ºC (or
0.75 x WVDC at 125 ºC) for 1000 hours, and
then stabilize them to +20 ºC. Capacitors will
meet the following limits:
Shelf Life Test:
Shelf life is typically 5 to 10 years. Accelerated test:
after 500 hours at125 ºC, capacitors will meet the
following limits after stabilization at 20 ºC:
Moisture Resistance:
After 500 hours storage at +60 ºC and 90% R.H.
without load, the capacitor will meet the following
limits:
Typical Impedance & ESR
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com
DF ≤ two times the initial specified value
DCL ≤ the initial specified value
∆C = +70%/–20% of the initial measured value
DF & DCL ≤ the initial specified value
DF & DCL ≤ the initial specified value
∆C = ±10% of the initial measured value
∆C = ±10% of the initial measured value
(2.0 & 2.5 Vdc),+60%/–20% of the initial
measured value (4.0 Vdc), +50%/–20%
of the initial measured value (6.3 Vdc),
+40%/–20% of the initial measured value
(8.0 Vdc).
(For more information on this product see the Solid Polymer Aluminum Application Guide)
ESRH271M02R
Impedance/ESR
270 µF/2V
Frequency (kHz)
ESRH680M02R
Impedance/ESR
680 µF/2V
Resistance to Soldering Heat:
Capacitors withstand being heated in an oven at
235 ºC for 200 seconds.
Soldering:
Solid Polymer Aluminum capacitors are designed
for reflow soldering.
Preheat the capacitors at 160 ºC for a maximum of
120 seconds. The time at or above 200 ºC on the
surface of the capacitor should be per the
following chart: