ALC10A331DC400 Kemet, ALC10A331DC400 Datasheet - Page 7

• Manufacturer Part Number: ALC10A331DC400
• Description: CAP ALUM 330UF 400V 2PIN SNAP
• Manufacturer: Kemet
• Series: Evox Rifa ALC10r

Specifications of ALC10A331DC400

• Capacitance: 330µF
• Voltage Rating: 400V
• Tolerance: ±20%
• Lifetime @ Temp.: 15000 Hrs @ 85°C
• Operating Temperature: -40°C ~ 85°C
• Features: General Purpose
• Ripple Current: 1.73A
• Esr (equivalent Series Resistance): 461.0 mOhm
• Impedance: 320 mOhm
• Mounting Type: Through Hole
• Package / Case: Radial, Can - Snap-In
• Size / Dimension: 1.378" Dia (35.00mm)
• Height: 1.378" (35.00mm)
• Lead Spacing: 0.394" (10.00mm)
• Esr: 461 mOhms
• Operating Temperature Range: - 40 C to + 85 C
• Diameter: 35 mm (1.38 in)
• Length: 35 mm
• Product: Aluminum Electrolytic Capacitors
• Termination Style: Snap In
• Test Frequency: 100 Hz
• Material, Element: Aluminum Electrolytic
• Termination: Snap-In
• Voltage, Rating: 400 VDC
• Leakage Current: 6 mAmps
• Load Life: 18000 Hrs
• Number Of Pins: 2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Surface Mount Land Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 399-5662

alc10 85°c
mounting position
The capacitor can be mounted upright or
inclined to a horizontal position.
vibration
10Hz to 500Hz at 0.75mm or 10g for 3x2hrs
duration. 10Hz to 55Hz at 0.35mm or 5g
for 3x0.5hrs duration (45/50mm diameter
cans).
operational lifetime
Please see separate
notes TD003 for calculating operational
life expectancy under customer specific
conditions.
oPErational data
BHC
application
The failure rate is derived from our periodic
test results. The failure rate (λ
only given at test temperature for life tests.
An estimation is also given at 40°C. The
expected failure rate for this capacitor range
is based on our periodic test results for
capacitors with structural similarity. Failure
rate is frequently quoted in FIT (Failures In
Time) where 1 FIT = 1 x 10
hour.
insulating resistance
> 100 Mohms at 100V d.c., across insulating
sleeve.
voltage Proof
> 2500V d.c., across insulating sleeve.
mEchanical data
-9
R
) is therefore
failures per
rEliability
T
85°C
40°C
Failure rate per hour for catastrophic plus
parametric failures.
safety vent
A safety vent for over pressure is featured
on either the base (opposing end to the
terminals) or on the the side of the can. This
is in the form of a grooved section on the
surface of the can which is a weakened area
and is designed to relieve build up of internal
pressure due to over stress or catastrophic
failure.
a
Failure rate per hour
250 FIT
12 FIT