TCP0J156M8R Rohm Semiconductor, TCP0J156M8R Datasheet - Page 5

• Manufacturer Part Number: TCP0J156M8R
• Description: CAP TANT 15UF 6.3V 20% SMD
• Manufacturer: Rohm Semiconductor
• Series: TCr
• Type: Moldedr

Specifications of TCP0J156M8R

• Capacitance: 15µF
• Voltage - Rated: 6.3V
• Tolerance: ±20%
• Esr (equivalent Series Resistance): 7.700 Ohm
• Operating Temperature: -55°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 0805 (2012 Metric)
• Size / Dimension: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Height: 0.043" (1.10mm)
• Manufacturer Size Code: P
• Features: General Purpose
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Spacing: -
• Other names: 511-1448-2

○
TC Series P Case
c
www.rohm.com
2010 ROHM Co., Ltd. All rights reserved.
Adhesiveness
Dimensions
Resistance to solvents
Solderability
Vibration
Item
Capacitance
Appearance
Refer to "External dimensions"
The indication should be clear
3/4 or more surface area of the solder coated
terminal dipped in the soldering bath should
be covered with the new solder.
The terminal should not come off.
Measure value should not fluctuate during the
measurement.
There should be no significant abnormality.
Performance
5/7
As per 4.34 JIS C 5101-1
As per 4.8 JIS C 5101-3
Apply force of 5N in the two directions shown in the figure
below for 10±1s after mounting the terminal on a circuit board.
Measure using a caliper of JIS B 7507 Class 2
or higher grade.
As per 4.32 JIS C 5101-1
As per 4.18 JIS C 5101-3
Dip in the isopropyl alcohol for 30±5s, at room
temperature.
As per 4.15.2 JIS C 5101-1
As per 4.7 JIS C 5101-3
Dip speed=25±2.5mm / s
Pre−treatment(accelerated aging): Leave
the sample on the boiling distilled water for 1 h.
Solder temp. : 245±5°C
Duration
Solder
Flux
As per 4.17 JIS C 5101-1
Frequency : 10 to 55 to 10Hz/min.
Amplitude : 1.5mm
Time : 2h each in X and Y directions
Mounting : The terminal is soldered on a print circuit board.
Test conditions (JIS C 5101−1 and JIS C 5101− 3)
: Rosin 25% IPA 75%
: 3±0.5s
: M705
product
a circuit board
Apply force
2010.02 - Rev.E
Data Sheet