CST115 Panduit Corp, CST115 Datasheet - Page 53

• Manufacturer Part Number: CST115
• Description: TOOL NOSE STRIPPER 20-10AWG
• Manufacturer: Panduit Corp
• Type: Single Level Stripper, Adjustabler

Specifications of CST115

• Cable Type: 10~20 AWG
• Features: -

1. Select the proper PANDUIT compression connector for the
2. Strip the conductor to the proper strip length.
Crimping Guidelines for PANDUIT
Compression Lugs and Splices
*See condensed tool charts on pages B4-B27; for complete tool charts
conductor type and size being used.
As specified:
refer to pages D2.148-D2.186 of the Electrical Solutions Catalog,
SA-ELCB03, at www.panduit.com.
• PANDUIT compression connectors are identified with
• The proper conductor
• On the PANDUIT product packaging label or
• On the installation instructions
• In the tool charts*
Make sure the conductor is not stripped too long, which
would result in exposed wire between the barrel of the
connector and the cable insulation.
Make sure the conductor is not stripped too short,
which would result in a less than complete contact area
with the connector when the conductor is inserted in
the barrel.
Do not nick or cut strands of conductor during
crimping, which would result in a less than premium
conductor termination.
Make sure conductor strands are free
from corrosion.
the proper conductor size and conductor type marked
on the tongue or barrel of the connector
size and type to be used
with each connector can
also be found in the
installation instructions
included with PANDUIT
product packaging and
in the tool charts*
included with PANDUIT
product packaging or
For service and technical support, call 800-777-3300
or visit www.panduit.com.
®
P
AN
-L
UG
™
B1